The Power Limiter parameter represents the maximum number of full intensity pixel CHANNELS. Here is a sample configuration. Assume that the installati...
jeffu231 wrote:I don't imagine there is a time limit in the code. Likely some bug in the routines that loops out or something. Can't say I have used o...
Happy birthday, Dave! Thanks for all you do and have done for this great hobby!
ags0000 wrote:Here is the spec that I followed for my design. This is also an "official" world-semi data sheet (from 10/2015). I wonder if the spec (t...
Do you have your controllers patched?
The last line of the errata sheet on the parts bag says to omit the MLCC capacitor. That's C5. If you look at the build instructions, you will see tha...
Looks like you have some of your answers from the errata sheet. I erred on saying that C5 was a 0.1 microfarad capacitor (it's 10 microfarad). Regardl...
I assembled two a year ago. No changes since 1/30/2014. C5 should be a 0.1 microfarad nonpolarized capacitor. There are only two resistor networks req...
There is no standard for this. You need to check the pixels and pigtails to make sure which wires are ground, data and V+.
Need more info...
Not sure about this but make sure the type of effect actually works with the type of lights/pixels you have. If you try to put a chase on a regular st...
Distance between pixels is really determined by how you want them to look from the distance they will normally be viewed. It rarely works out to an ex...
You definitely need the 1 Gb connection or you're out of luck. You'll need it to communicate from the Pi to the Colorlight card for your sequences as ...
Happy birthday, Jeff! Enjoy the gift of another day and make the most of it! Thanks a lot for all you do for this marvelous hobby which brings joy to ...
