I am trying to figure out what the usual color code is for connecting WS2811 pixels. Apparently that is not quite that trivial. I searched google which brings up conflicting links and the search in the forum didn't bring up much. Anyways, I have xConnect cables with brown, blue and yellow/green cables. From what I have found it seems
* blue = GND/0V
* yellow/green = data
That leaves brown as +12V. Is this how you are doing it?
There is no standard for this. You need to check the pixels and pigtails to make sure which wires are ground, data and V+.
Ed is correct. There is no standard, but...
We have noticed that the manufacturers have lately been pretty good in getting the colors that you found on wired watts' website correct. Add "white" (red, white, blue wire) to data line and you pretty much have it.
But - always check. Every so often you will find things get off from the manufacturer. Be safe. Check.

