What specifically does this feature do and what does the setting mean?
It currently shows ?9999?.
Since that was the default I assume it equates to 100%. If so what would the 50% setting be?
Did some searches and read the manual but couldn?t find much.
Thanks
can you post a screenshot please
The description of this feature is all contained in the firmware v 5.X documentation. Never used it myself.
The Power Limiter parameter represents the maximum number of full intensity pixel CHANNELS. Here is a sample
configuration. Assume that the installation uses 12V pixels that draw 10ma per channel at full intensity. Each pixel
channel then corresponds to 120mw of power (12 volts X 10ma). Assume that we have a 350W power supply powering
the controller. 350 watts divided by .120 watts per channel = 2917. The total number of full intensity pixel channels that
the power supply can support. This is the value that would be entered into Power Limiter.
Thanks for the replies
