Colorlight 5A-75B P...
 
Notifications
Clear all

Colorlight 5A-75B Panel Controller help

7 Posts
4 Users
0 Reactions
3,183 Views
Posts: 79
Topic starter
(@tomas041857)
Estimable Member
Joined: 8 years ago
[#54170]

I am trying to figure out these Colorlight 5A-75B Panel Controller. I know that each Colorlight 5A-75B Panel Controller has 8 outputs but what I am trying to figure out is how many P5 panels each output can control. I am trying to wire up a 5 panel wide by 6 panel high matrix made of P5 panels. I have 2 Colorlight 5A-75B Panel Controller, 2 5vdc power supplies and controlled by a Pi 4. I just need help trying to get it all hooked up electrically.
Thanks for any help.
Tom


6 Replies
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago

See the second part of this video. It should help get you started. http://videos.xlights.org/xessentials-e26-p5-p10-panels-and-the-colorlight-board_f8084fcc8.html


Reply
Posts: 79
Topic starter
(@tomas041857)
Estimable Member
Joined: 8 years ago

I watched that video and it does not help with what I want. I need help with the best way to wire it up.


Reply
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

I think you'll find a bit more support over at ACL or on the xLights Zoom room. I have a 42 P5 with (2) 5A-75B with 3 panels per output. A little unclear on what your actual question is or I would try to help. Great forum post over at ACL going over a dual colorlight setup with P5's. https://auschristmaslighting.com/threads/multiple-colorlight-cards-with-fpp-for-p5-panels-guide.11762/


Reply
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago

Try this one https://www.youtube.com/watch?v=JQerpqt76VU


Reply
Page 1 / 2
Share: