Colorlight 5A-75B P...
 
Notifications
Clear all

Colorlight 5A-75B Panel Controller help

7 Posts
4 Users
0 Reactions
3,184 Views
Posts: 401
(@kensington)
Reputable Member
Joined: 11 years ago

In general, each 5A-75B can control a 256x256 pixel matrix. That equates to a 4x8 P5 matrix. On average, that would be 4 panels per port. The recommendation is to use as many outputs as possible—like if you have 8 panels, use 8 outputs of 1 panel each instead of 4 outputs of two panels each.

However, depending on the configuration file sent with your panels, the actual number of pixels and panels that can be controlled may be less than 256x256. LED Vision should tell you what acceptable configurations are, and there’s also some hacking of the clock frequency you can do if the maximum resolution is unavailable.


Reply
Posts: 79
Topic starter
(@tomas041857)
Estimable Member
Joined: 8 years ago

Thanks for the help I will try all of these.
Tom


Reply
Page 2 / 2
Share: