Activity
 
Notifications
Clear all
brianamos
@brianamos
Eminent Member
Joined: Aug 25, 2020
Topics: 1 / Replies: 17
Reply
RE: Arduino Uno + 8 SSR + ESP8266 + Xlights. Any guidance?

Fotofobia wrote:Thank you for sharing. I'm looking for something to specifically handle AC lights (just On / Off). My initial questions: which 8266 ...

5 years ago
Forum
Reply
RE: Teensy 4.1 E1.31 receiver/controller

gregfaust wrote:I'm interested in this @brianamos. If you're making more, please count me in. I like the idea of keeping the power distribution sepa...

5 years ago
Forum
Reply
RE: FPP PB16 Pixel Controller

ninjinja wrote:Is there any ethernet options that are not USB? This project looks really good, so far I use RonP controllers, but am looking for some...

6 years ago
Forum
Reply
RE: Teensy 4.1 E1.31 receiver/controller

purpleprawn wrote:Are you able to share the updated code with the 32 outputs? This might solve a long running headache for me! I thought I already h...

6 years ago
Forum
Reply
RE: ESPIXEL WS2811 Prop Strobing

slug wrote:I will do that. Would a test on the pixelstick stop it from executing a second time? It shouldn’t, the auto sequence should stop once v...

6 years ago
Reply
RE: ESPIXEL WS2811 Prop Strobing

Is this a vixen issue or a pixel stick issue, or a combination of both? The pixel stick can run a sequence (such as flashing) when it’s not receiving ...

6 years ago
Reply
RE: DIY Pixel Controller

I have a design for a teensy4.1. I’ve posted about it here before. Also, I have a board I’m working on for it with 32 strings of output. You can find ...

6 years ago
Reply
RE: FPP PB16 Pixel Controller

smccoy wrote:I was perusing the KiCad files and noticed that the schematic components aren't lining up with any of the standard snap grids. Were spec...

6 years ago
Forum
Reply
RE: Remote WIFI antenna

Run a very short cable and use the same sma adapter the existing antenna uses so you can reuse it. Unless you want a directional antenna, then you can...

6 years ago
Reply
RE: Teensy 4.1 E1.31 receiver/controller

That’s fairly impressive for the feather to push 2000 pixels, the process they use is fairly similar to that used on the T4.1. The cost of the feather...

6 years ago
Forum
Reply
RE: Teensy 4.1 E1.31 receiver/controller

I did some stress testing this morning. I reprogrammed it to get 640 pixels per output with 32 outputs. I ran the xlights sequence at about 30 FPS, a...

6 years ago
Forum
Reply
RE: Teensy 4.1 E1.31 receiver/controller

Here is a demo of the T4.1 running 1200 pixels at 40hz refresh rate. Control is by xLights on my Mac. The connection is wifi between the host compute...

6 years ago
Forum
Reply
RE: Teensy 4.1 E1.31 receiver/controller

gomer23 wrote:I picked up a 4.0 here a couple weeks ago, and using ShadowLight's Sketch it didnt work out of the box so I am picking up another 3.2 fo...

6 years ago
Forum
Reply
RE: Teensy 4.1 E1.31 receiver/controller

I’m still at the breadboard stage, I don’t have it in production yet. Hopefully I’ll be able to get it running in this year's show. You can find the b...

6 years ago
Forum
Topic
Forum
Replies: 29
Views: 24718
Page 1 / 2
Share: