Remote WIFI antenna
 
Notifications
Clear all

Remote WIFI antenna

6 Posts
5 Users
0 Reactions
2,424 Views
Posts: 376
Topic starter
(@k-state-fan)
Reputable Member
Joined: 16 years ago
[#53092]

I am wanting to move my antenna to external on my controller box. I am using an EDUP that has a removable antenna. Anybody have a link to a bulkhead and extension wire that they use?


5 Replies
dirknerkle
Posts: 10309
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Be careful with that. A long antenna cable can soak up significant RF energy, leaving less that gets to the antenna itself which can severely impact the performance of a low-powered transmitter. It would be better to move the whole unit and run a longer audio cable to the transmitter than using a long wire from the transmitter to the antenna.


Reply
Posts: 376
Topic starter
(@k-state-fan)
Reputable Member
Joined: 16 years ago

WIFI antenna not FM antenna.

I want to unscrew the antenna from this to an adapter outside of the box.

Capture

Reply
Posts: 18
(@brianamos)
Eminent Member
Joined: 6 years ago

Run a very short cable and use the same sma adapter the existing antenna uses so you can reuse it. Unless you want a directional antenna, then you can use something like a cantenna, or buy a yagi antenna for your desired frequency.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

Just extend the USB cable. Way back we needed to move the EDUP away from the BBB due to interference of the HDMI - 1 foot extension was recommended, but I only had a 3 foot - it worked until I got a one footer. Today they turn off the HDMI as default so no need for extension


Reply
Page 1 / 2
Share: