Results 1 to 3 of 3

Thread: Renard 16 (xmus) resistor array replacement

  1. #1
    Join Date
    Feb 2008
    Location
    Warminster, PA
    Posts
    1,767
    Post Thanks / Like

    Default Renard 16 (xmus) resistor array replacement

    So, I'm hoping to get some input from those more knowledgeable.
    I have two XMUS Renard 16 board here that I want to populate this year but the Resistor Network in the BOM requires a 200 count minimum purchase. I found some similar networks that don't have this and I think they would be suitable replacements but, if possible, I'd like confirmation.

    The original bom part is https://www.mouser.com/ProductDetail...252Blfjw%3D%3D

    and I think a suitable replacement would be https://www.mouser.com/ProductDetail...4uFT8N3g%3D%3D

    The only difference I really see is the temperature coefficient and I'm not sure if that affects anything here.

    Thanks
    Chris
    [URL="http://www.maloneylights.com"]http://www.maloneylights.com[/URL]
    [URL="http://halloween.maloneylights.com"]http://halloween.maloneylights.com[/URL]
    [URL="http://ctm.maloneylights.com"]http://ctm.maloneylights.com[/URL]

  2. #2
    Join Date
    Dec 2007
    Location
    Colorado Springs
    Posts
    3,896
    Post Thanks / Like

    Default Re: Renard 16 (xmus) resistor array replacement

    The replacement you show should work just fine. The biggest concern was the spacing of the pins, but the replacement has identical spacing.

  3. #3
    Join Date
    Feb 2008
    Location
    Warminster, PA
    Posts
    1,767
    Post Thanks / Like

    Default Re: Renard 16 (xmus) resistor array replacement

    Sweet! Thank you.
    Chris
    [URL="http://www.maloneylights.com"]http://www.maloneylights.com[/URL]
    [URL="http://halloween.maloneylights.com"]http://halloween.maloneylights.com[/URL]
    [URL="http://ctm.maloneylights.com"]http://ctm.maloneylights.com[/URL]

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •