Activity Stream

I apologize no one answered your question. Personally, I didn't even see it (Halloween crunch, probably). Actually, the effect in Xlights is...

Can it be modeled as a spiral tree with the same diameter on top as on the bottom? With one string? I don't use Vixen anymore but it may be an...

OK. Just wanted to be sure. Yes, if there are multiple sources of sync messages in your network, things can get very interesting.

I'm running latest V4 build. I was recalling the setting from memory and got it wrong. The setting is "Send FPP Sync" under the "FPP Remote...

Just to add I did this to my setup today. I needed to reorder the <controller> nodes in the <controllers> group in the file...

I've had to rejuvenate several inflatables over the past few years. Step 1: look for any bad seams, zippers or tears and patch as needed. 2: open up...

Did you ever get a fix that worked? I have the same problem with the same inflatable.

When I upgrade major versions on my FPPs, I typically alternate SD cards. I?ll save the working one and load up a new one with the new version. Then...

Under many cases I would agree. However there are some cases of "If it aint broke, dont fix it". I have latest FPP V7 on my singing faces FPP but my...

What software are you running on the ESPs? V4 does not have such a setting.

You dont need a home run for each power feed BUT you do need to calculate the voltage drop on your planned runs. Starting with 14AWG wire, you should...

Thanks for the advice guys. Im leaning toward mounting the pixels on the outer part of the soffit facing out. I have a side street that runs...

Check this out too, it might help. https://diychristmas.org/vb5/node/215823

Maybe use a vacuum cleaner to pull a cord (with a small clotth ties to it) through the pipe. Then you can pull the lights through tied to the cord.

Personally I'd use the custom prop editor then you can insert multiple on your preview(s) once created. You can select 'reverse patching order' when...

I agree and I thought maybe I left "Send Sync Messages" enabled on one of the ESPixelStick remotes, but I verified that was not the case. As an...

It's not a bad idea to step upgrade when you're making such a big jump. But when it comes to FPP, you should try to be no more than a year behind...

Worried about too many new things. Plus Martin said he was using v5.2 Sent from my iPhone using Tapatalk

Why did you just go to 5.2? Why not bring it all the way forward?

So I finally had a chance this weekend to take the RPi down and upgrade FPP from V4.2 to V5.2. Everything works great now. I had checked everything...

There are a LOT of them out there... should be able to find some...

Our numbers vary a bit. High density run at 25%. Non-high density are at 30%. Our pixels in PEX are at 50%. They all look great!

for my columns, i just draw a line. I only have one strand for now. you would have two, one up and another down.

Amigorick, I have a couple of them available.

Nevermind. It sold locally in under an hour. Wow.

Where else should I buy my lights?