RGB Mega Tree Confi...
 
Notifications
Clear all

RGB Mega Tree Configuration

5 Posts
5 Users
0 Reactions
2,186 Views
Posts: 347
Topic starter
(@dougd)
Reputable Member
Joined: 19 years ago
[#23684]

Working on my display for the coming year. I have pretty much everything decided except for my RGB mega tree. I know I am going to use 2811's but in what configuration. 360 degree's or 180 degree's, 24 strings or 32 string, 32 pixels high, 40 pixels high, 48 pixels high, you catch my drift, too many options.

I am wanting to see what configurations everyone did this past year, were you happy with it and a link to video of it would be wonderful.

Mine this past year was more of a "Ray" than mega tree using GECE pixels, 16 strips by 40 pixels high.

Video link is

Hopefully no one else has done this, if they did I couldn't find it.

Thanks.


4 Replies
Posts: 255
(@joej85)
Reputable Member
Joined: 15 years ago
dougd wrote:

Mine this past year was more of a "Ray" than mega tree using GECE pixels, 16 strips by 40 pixels high.

I am interested in exactly the same thing. I have GECE's that I need to put to good use.

I was actually thinking about building a 2D tree like yours 🙂


Reply
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago

I did a full 360 42 pixel high 32 string - was very pleased with it.
For text displayed on the tree I found the bleed through of colour from the pixels at the rear made the text unreadable (quite nice for some effects). So for text I only used the 16 strings at the front of the tree (easy in hutcracker).
I think it depends on your viewing angle - if it will only be viewed from the front 180 will save you money (and by next year software sequences will proberbly be able to ghost the rear 180 into the front anyway to make it look like a 360 tree).
If you have various viewing angles you will need 360.
I'm thinking that next year I will proberbly just have a 180 tree and use the rest of the pixels to make a realy good star.
Just my thoughts - Hope that helps


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

Mine was a 240-degree, 30 string, 42 pixel tree. This allowed simple 8-degree geometry to save me some 'cipherin... You could go less of an angle but I wanted a tad more than 180 degrees as I live just off the corner so wanted to be sure it showed from every angle as seen from a car. I definitely would recommend a less than 360-degree as it makes it easy to service things from the back instead of trying to wedge myself between strings (a truly comical sight) to get to the controllers. 42 pixels works good for the E68x controllers as well - you end up with 16 strings of 42 for 672 of 680 pixels supported (I have the older 681 so only 4 universe supported).


Reply
michaelc
Posts: 1540
(@michaelc)
Noble Member
Joined: 19 years ago

I'm looking to do my first mega tree out of gece g35 pixels myself. I don't need it to be very high. I was actually thinking of folding the strings in half but I'm not sure how it would look.

I really wanted to try to make a 'mega tree' out of an actual beautiful christmas tree that I have on the corner of my house but I don't know how the strings would lie. I did get the okay from the wife to finally add a flagpole tree with the condition that it is removable. So I've got some choices to make.

Has anyone seen mega tree effects on an actual live tree?


Reply
Share: