Having problems usi...
 
Notifications
Clear all

Having problems using a E6804 and E682 in the setup

24 Posts
7 Users
0 Reactions
6,711 Views
Posts: 1115
Topic starter
(@11bravo)
Noble Member
Joined: 14 years ago
[#47207]

I want to configure a E6804 to run my window frames along with the E682 that runs the pixel tree and Eves. The E682 starts at universe 1.

When you add a second controller do you start the E6804 after the last universe configured in the E682? It doesn't work for me when I do that.
I am having trouble getting my windows to work independently of the mega tree and eves effects. I can configure E6804 to start at universe 1 like the E682, but then the window effects follow the effects of the megatree and eves.


23 Replies
Posts: 357
Guest
(@jerry72)
Reputable Member
Joined: 13 years ago

6804 needs to start on its own universe, if the 682 is using universes 1-5, then the 6804 needs to start on universe 6, make sure your channels in the sequence are set up the same as well.


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

Jerry is right. Even though you have one prop following another that's all done in the sequencing software. The controllers follow the instructions your sequencing software sends them. Every controller you use needs have a different IP address. Your patching of elements decides which controller you want the information from your sequencing software to go.

Sent from my SM-T710 using Tapatalk


Reply
Posts: 1115
Topic starter
(@11bravo)
Noble Member
Joined: 14 years ago
jerry72 wrote:6804 needs to start on its own universe, if the 682 is using universes 1-5, then the 6804 needs to start on universe 6, make sure your channels in the sequence are set up the same as well.

thank you, I'll keep working at it. I can't seem to get the numbers right for the pixel tree which is run by the E682.


Reply
Posts: 1115
Topic starter
(@11bravo)
Noble Member
Joined: 14 years ago

Please check my configuration:

The E682 will run the MT which has 16 strings of Ws2811 bullets 50 count per string,
Strings are in series, odd and even are connected for a 100 count string with pwr injection at the end of each odd string.
and setup to zigzag every 50.
The rest of the controller outputs will run pixels on the eves.

The E6804 will hopefully run pixels on the window frames.

E682configC

E6804configC

Reply
Page 1 / 5
Share: