Activity
 
Notifications
Clear all
11Bravo
@11bravo
Noble Member
Joined: Dec 19, 2012
Topics: 145 / Replies: 970
Topic
Forum
Replies: 3
Views: 2845
Reply
RE: Espixel by Bill Porter

you know, back a couple yrs ago when no one had any spare pixlepops PCB's I ordered some, and when I got them they were a thin PCB almost half the thi...

6 years ago
Reply
RE: SS series controllers

Thank you very much for the instructions. I'll copy and add to my notes with the controller. About the J22 jumpers. If using for example any or all ...

6 years ago
Forum
Reply
RE: SS series controllers

pmiller wrote:I ran my SS boards from a Sandevices 6804 and 682. Sent from my SM-T710 using Tapatalk Can anyone answer this? I have an E682 and a 6...

6 years ago
Forum
Reply
6 years ago
Forum
Reply
RE: about combining FPP with universes (i use ESP8266).

MartinMueller2003 wrote:While such a distance is within the electrical spec, it is a physical hazard. In this case we are talking about a wire that wi...

6 years ago
Reply
RE: REN48lsd RJ45 pin 5 & 7 Version V3c

OK, succeeded in driving a DIYC flood via Vixen 2.1.

6 years ago
Forum
Reply
RE: REN48lsd RJ45 pin 5 & 7 Version V3c

Thanks angus, it has been a couple years since I put this board together. the first one I built, I used it for diyc floods for a couple years. Then fo...

6 years ago
Forum
Reply
RE: REN48lsd RJ45 pin 5 & 7 Version V3c

Well I think I got it. If that isn't correct, I'll probably wreck a transistor or more.

6 years ago
Forum
Topic
Forum
Replies: 5
Views: 3116
Reply
RE: 20W Flood RGB LED driver board (WS2811)

LazerBlue wrote:Any controller will handle them. You just run ground and data from the controller and power separately. I believe the V3 ESPixel st...

6 years ago
Reply
RE: 20W Flood RGB LED driver board (WS2811)

Thank you for the reply. What is the power supply that you would recommend for running 8 of the 20watt floods? And what controller does 24volts ws281...

6 years ago
Reply
RE: 20W Flood RGB LED driver board (WS2811)

I want to convert my DIYC floods to 20 watt pixel floods. is the PCB and parts still available?

6 years ago
Reply
RE: Espixel by Bill Porter

If I may make a suggestion, when testing, I would only use one Pixel to test with instead of a whole string of them just incast you made a mistake. Y...

7 years ago
Reply
RE: RenardESP Information Thread

Thanks for the information, I will add that to the graphics for future reference.

7 years ago
Forum
Page 1 / 75
Share: