ESPixelStick - E1.3...
 
Notifications
Clear all

ESPixelStick - E1.31 WiFi Pixel Controller

948 Posts
178 Users
0 Reactions
503.7 K Views
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago
mrGrumpy wrote:Identification markers of one of the dodgy ESP-01/ESP-01S flash chips - there may be others.

The identifier I'd go by is the PUYA branded flash chip. 🙂


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
David_AVD wrote:The identifier I'd go by is the PUYA branded flash chip. 🙂

The chip can't be read on a screen picture - identifiers can be....maybe not the 100% protection, but a good start.


Reply
Kev7274
Posts: 2037
(@kev7274)
Famed Member
Joined: 13 years ago

I just buy them form the same vendor. No issues with the 30 or so I have purchased.
They have AI-Cloud Inside on them.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
David_AVD wrote:The identifier I'd go by is the PUYA branded flash chip. 🙂
mrGrumpy wrote:The chip can't be read on a screen picture - identifiers can be....maybe not the 100% protection, but a good start.

Appears we have multiple different assemblies with the dodgy PUYA chip.
Not sure how to protect buyers, but suggest you ask seller to verify PUYA chip wasn’t used, and buy only from origination with buyers protection


Reply
Posts: 19
(@cengiz)
Active Member
Joined: 11 years ago

Version 2

It takes about 5 seconds from power up to connect to the network, I want you to connect in 18 seconds. how to edit the code. which line?


Reply
Posts: 19
(@cengiz)
Active Member
Joined: 11 years ago
sporadic wrote:Can you create an issue here so I can track it? I had another user say they were having issues with a higher channel Renard setup as well. I'll need to take a closer look at the serial output code.

v2 and 2.1 ota update. There was no DMX512 problem. Whatever it was, v3 and higher version only have 170 channels working. 🙂


Reply
Posts: 19
(@cengiz)
Active Member
Joined: 11 years ago
cengiz wrote:Version 2

It takes about 5 seconds from power up to connect to the network, I want you to connect in 18 seconds. how to edit the code. which line?

Solved


Reply
Posts: 16
(@smithzone)
Eminent Member
Joined: 9 years ago

Following as I need to order some more of these - I see end of FEB is latest update


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
Kev7274 wrote:I just buy them form the same vendor. No issues with the 30 or so I have purchased.
They have AI-Cloud Inside on them.

That is not the answer to sourcing the ESWP-01.....this dodgy PUYA chip is problematic across several application segments. No one has a solution, except to replace the PUYA chip.
Known good suppliers will eventual replace their stock, and no one knows what they will get......and I sure most suppliers won't ask or know about the dodgy chip, when they do restock.

See This Thread:
https://diychristmas.org/vb1/showthread.php?8705-ESP-flashes-connects-loses-firmware-after-making-changes&p=96206&viewfull=1#post96206

What was shipped yesterday may not be what is shipped today.


Reply
Posts: 1
(@johnnycole)
New Member
Joined: 9 years ago

In desperate need for one more ESPixel board. Building out a regional theater show and didn't expect or know there was limited supply. Please keep us updated around availability.


Reply
Page 88 / 95
Share: