jchuchla wrote:Wouldn’t the better answer be to fix whatever is wrong with v3 that worked in v2? Sent from my iPhone using Tapatalk You are absol...
Hello, Thanks for this beautiful project, the laken is reset every 15 minutes. You'll have to deal with this problem and when will you regenerate it.
Gnarmstr wrote:That is sort of true, I have recently been told that there really is no limit to the number of pixels or Universes for the ESPixel. The...
sporadic wrote:The V2's have been doing very well and am planning to stick with the current design for now. It would be great if you did v3 interfa...
cengiz wrote:Version 2 It takes about 5 seconds from power up to connect to the network, I want you to connect in 18 seconds. how to edit the code. w...
sporadic wrote:Can you create an issue here so I can track it? I had another user say they were having issues with a higher channel Renard setup as w...
Version 2 It takes about 5 seconds from power up to connect to the network, I want you to connect in 18 seconds. how to edit the code. which line?
sporadic wrote:Can you create an issue here so I can track it? I had another user say they were having issues with a higher channel Renard setup as w...
MartinMueller2003 wrote:DMX serial output cannot do more than 512 channels. That is a limit of the protocol. Renard Serial protocol can go higher. If ...
I tried 3 different robots. The address does not get a signal when it rises above 170. Help please. v2.0 512 channels are working. V3.0 only 170 chan...
Everything is okay, version 3.0 okay. DMX512 mode only 170 channels are working. Could this be why? Has anyone tried V 3.0? I tried running V2.0 w...
cengiz wrote:Thanks for the quick response. It was solved with the hint you had. I enter the SSID and password correctly but it is not connected. It ...
Thanks for the quick response. It was solved with the hint you had. I enter the SSID and password correctly but it is not connected. It connects when...
Hello, Apart from the espixelsitick V3 flash tool, I want to install it with arduino ide software. I get the following errors. What am I doing wrong?...
How to learn this code for the STM32F108. How many universes can we use with this Chip?
