I found part of the problem. For some reason, my computer can't access the web server. But I was able to access the servers of both controllers from my phone. Upon logging in, I found one of the E6804 turned on it's test pattern from 0 to 2. Thereby setting one string to green while the other 3 strings are off. No idea how this happened since it was working fine last night. I'm staring to think updating Vixen to the latest version somehow messed up something on my computer. Since the E681 uses multicast, and works fine. I'm taking a guess that it has something to do with the unicast used by the E6804s.
Ok. Now that I am able to access the web server and properly configure both E6804s via my phone, it appears that Vixen on my computer can output lighting data to all my controllers including the 2 E6804s. But my computer still can't connect to the 2 E6804s' web servers. I have tried multiple browsers, but still no luck. But everything else is working as normal, so I'm grateful for that.
Davor wrote:Ok. Now that I am able to access the web server and properly configure both E6804s via my phone, it appears that Vixen on my computer can output lighting data to all my controllers including the 2 E6804s. But my computer still can't connect to the 2 E6804s' web servers. I have tried multiple browsers, but still no luck. But everything else is working as normal, so I'm grateful for that.
Do you have a route command set on your computer that directs output to your 2 6804s? How is your network setup? Home network and show network separate or the same?
Vixen immediately starts outputing when you launch the program unless you turn off output to lights. When you have FPP running you should have Vixen either shut down or the outputs turned off.
Sent from my SM-T710 using Tapatalk
Davor wrote:I found part of the problem. For some reason, my computer can't access the web server. But I was able to access the servers of both controllers from my phone. Upon logging in, I found one of the E6804 turned on it's test pattern from 0 to 2. Thereby setting one string to green while the other 3 strings are off. No idea how this happened since it was working fine last night. I'm staring to think updating Vixen to the latest version somehow messed up something on my computer. Since the E681 uses multicast, and works fine. I'm taking a guess that it has something to do with the unicast used by the E6804s.
It's possible that when you shut down you switched from test pattern 2 to test pattern 0 and forgot to hit save so when the 6804 was turned back on it went into test pattern automatically.
Sent from my SM-T710 using Tapatalk
