E6804 web server no...
 
Notifications
Clear all

E6804 web server not responding

20 Posts
4 Users
0 Reactions
3,868 Views
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

Don't know what to tell you. Since you can't access either controller I have to assume it's network related and I'm not a network guru.

Sent from my SM-T710 using Tapatalk


Reply
Davor
Posts: 221
Topic starter
(@davor)
Reputable Member
Joined: 16 years ago

I plugged my computer directly into the E6804 and set a static IP on my computer and still can't reach the E6804's web server. I, however, can still ping the E6804 from my computer with no packet loss. So I think this rules out a network problem. I also have an E681 in my display and it works without issue. Anyone have any ideas?


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago
Davor wrote:I plugged my computer directly into the E6804 and set a static IP on my computer and still can't reach the E6804's web server. I, however, can still ping the E6804 from my computer with no packet loss. So I think this rules out a network problem. I also have an E681 in my display and it works without issue. Anyone have any ideas?

You mentioned you had 2 6804's that you couldn't access. Is this correct?

Sent from my SM-T710 using Tapatalk


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

Do you have a prop plug? If so update the controller firmware.

Sent from my SM-T710 using Tapatalk


Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago

This may sound silly, but are your network wires fully protected/sealed against water? I'm in Oregon and I used some of those network extenders (a small block with a female socket on each end) my first year and didn't cover them properly. After removing those extenders, drying them thoroughly, and changing network cables I was able to reach my controllers again.


Reply
Page 3 / 4
Share: