Davor wrote:Yes, the IPs are different. I can ping both from my command prompt and receive a reply 0% packet loss. How do I do a reset?
I forgot. You can't reset until you access the web page.
Sent from my SM-T710 using Tapatalk
Something going on in your network because you said you also can't access the second 6804. If the second 6804 is still connected, disconnect and see what happens.
Sent from my SM-T710 using Tapatalk
pmiller wrote:Something going on in your network because you said you also can't access the second 6804. If the second 6804 is still connected, disconnect and see what happens.Sent from my SM-T710 using Tapatalk
Still can't access it with just one 6804 connected to my network.
Davor wrote:Still can't access it with just one 6804 connected to my network.
If you can't access either one then it's a network issue. Highly unlikely both controllers went bad at the same time. If your controllers are connected to a network switch make sure the switch has power. Make sure all connections to the switch are seated in all the way, especially the one from the computer.
Sent from my SM-T710 using Tapatalk
pmiller wrote:If you can't access either one then it's a network issue. Highly unlikely both controllers went bad at the same time. If your controllers are connected to a network switch make sure the switch has power. Make sure all connections to the switch are seated in all the way, especially the one from the computer.Sent from my SM-T710 using Tapatalk
I used two different switches with same result. One is a megabit and second is a gigabit.
