My E6804 was working fine last night. Then tonight, the pixel strings on outputs 2,3,4 are not lighting and the string on output 1 is stuck on green. I tried to access the web server, but my browser can't connect. I ping the IP from my computer and get a reply all 4 times. I then did a temporary IP change to 192.168.1.206, but browser still can't connect. Pinging 192.168.1.206 is also successful, while the old IP no longer works (as expected).
As for the LEDs on the board, the red LED is on solid. Green LED is flashing. On the ethernet jack, the amber LED is solid while the green LED flashes occasionally. All the fuses appear to be good.
Only change to the display is I just added another E6804, which I also can't access at the moment.
Anyone know what could be wrong?
Davor wrote:My E6804 was working fine last night. Then tonight, the pixel strings on outputs 2,3,4 are not lighting and the string on output 1 is stuck on green. I tried to access the web server, but my browser can't connect. I ping the IP from my computer and get a reply all 4 times. I then did a temporary IP change to 192.168.1.206, but browser still can't connect. Pinging 192.168.1.206 is also successful, while the old IP no longer works (as expected).As for the LEDs on the board, the red LED is on solid. Green LED is flashing. On the ethernet jack, the amber LED is solid while the green LED flashes occasionally. All the fuses appear to be good.
Only change to the display is I just added another E6804, which I also can't access at the moment.
Anyone know what could be wrong?
Temporary ip is exactly that, temporary. When you reboot the controller it goes back to the ip you set for it. Unplug your network cable and disconnect power to the 6804. Then plug power into 6804 and wait a few seconds before connecting network cable. When plugging in the network cable make sure the module is seated down all tbe way.
Sent from my SM-T710 using Tapatalk
pmiller wrote:Temporary ip is exactly that, temporary. When you reboot the controller it goes back to the ip you set for it. Unplug your network cable and disconnect power to the 6804. Then plug power into 6804 and wait a few seconds before connecting network cable.Sent from my SM-T710 using Tapatalk
Yes. I only set the temporary IP as a troubleshooting step. I did that to eliminate the possibility that the original IP was conflicting with something on my network. Both the original IP I had set on the board and the temporary IP shows the same symptoms. I.E. I can't connect via browser, but I can ping from my computer.
Davor wrote:Yes. I only set the temporary IP as a troubleshooting step. I did that to eliminate the possibility that the original IP was conflicting with something on my network. Both the original IP I had set on the board and the temporary IP shows the same symptoms. I.E. I can't connect via browser, but I can ping from my computer.
This may sound dumb but are the ip's for both the 6804's different? You may have to reset the 6804.
Sent from my SM-T710 using Tapatalk
pmiller wrote:This may sound dumb but are the ip's for both the 6804's different? You may have to reset the 6804.Sent from my SM-T710 using Tapatalk
Yes, the IPs are different. I can ping both from my command prompt and receive a reply 0% packet loss. How do I do a reset?
