Super Strip Flood C...
 
Notifications
Clear all

Super Strip Flood Controller

240 Posts
30 Users
0 Reactions
91.6 K Views
Posts: 3277
 Jrd
(@jrd)
Famed Member
Joined: 19 years ago

If I am understanding the Wikipedia article on PWM (which I could easily not be) then AC loads, including lights, should be able to be controlled fine by PWM. Besides it's not the theory that really matters, it's the end result. And Dave already told us that PWM works fine for dimming AC lights.


Reply
Posts: 1424
(@oldcqr)
Noble Member
Joined: 18 years ago

I was going to post something about how I think Triacs worked and then realized I would be talking down to about 99% of you 😉


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

Have to disagree... based on the AC signal you would have been talking down to about 44.5%, and talking up to the other 44.5%. 😎


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago
LabRat wrote:Have to disagree... based on the AC signal you would have been talking down to about 44.5%, and talking up to the other 44.5%. 😎

(I just hope I'm not one of the members that you are attempting to "chat up" :roll:)


Reply
Posts: 789
(@chilloutdocdoc)
Prominent Member
Joined: 18 years ago

Wait a minute, sorry. I thought we were talking about PWM with Zero Cross as opposed to PWM without Zero Cross, for AC dimming only.

PWM with Zero Cross will work for AC
PWM without Zero Cross will NOT work for AC


Reply
Page 40 / 48
Share: