Oh yes.. and also updated to reading the panel config from the ledtriks (.led) files themselves.
I don't have any of those (but would love to get a copy of the PCB files). Alas my "free use" copy of eagle won't allow me to layout a file that larg...
Apologies for the lack of updates on this project. There has been significant progress. (and some unexpected hurdles that delayed things a bit) Worki...
Just keep in mind that the RENARD protocol consumes the channel data (8 per PIC in the old boards). So if your plan is to only use 8 channels, you wou...
Prototype ready for integration testing... (though as I type this I realized I'm not doing anything with the panel-ID yet.. so *if* I try and do a mul...
Serial output is certainly something to look at as a second phase, and/or when I revisit the PCB after this proof of concept effort on the breadboard....
Brain dump as I encounter my first "whoops.. didn't think about THAT" in developing this solution. Started this morning to draft up some firmware to...
Good point.. a 3.3v HIGH signal should still be interpreted as a HIGH input for the bit shifters on the LEDTRIKS.. and if those input signals are floa...
Hmm.. thinking that through. If I'm not mistaken, I believe it would simply change the RJ45 jack (cable to the LEDTRIKS) to a DIP header (plug into t...
Almost forgot ... those particles aren't going to break down .. so be sure to... *WEAR A MASK!!!!*
Background: Using foam (pink/blue insulation mostly) to make theatre sets/props Quick list of "if you're gonna go there, here are some lessons learned...
Also includes a control layer, as I was trying to get to the point where I could wirelessly config (or reflash firmware). Still a work in progress, ...
A few months late.. but take a look at my WNRF project, that does what I think you were looking for.
Raspberry Pi's can become FM transmitters.
