Renard - PIC16F688 ...
 
Notifications
Clear all

Renard - PIC16F688 Replacement

23 Posts
11 Users
0 Reactions
9,645 Views
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago

If someone had an actual "must have" hardware reason to have an "out of production" part, I bet the price per part would be frightening even at qty.

However, Microchip is a great company with a great product- no doubt.

Mr. Short,

Any plans for updating the Renard DMX code to work on 1825? Is that even possible? I ask because I have an idea for a little DMX address duplicator device to allow things like Obey 3 to drive a set of floods leaving them addressed to their unique show addresses instead of having to reprogram to address 1 all the time. It would be nice to not have to use a crystal that scarce these days.

THX, Kirk


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

I've got DMX receive code operational on the 16F1823 (and 12F1822). It should be almost trivial merge that into Phil's REN image.

CaptKirk wrote:If someone had an actual "must have" hardware reason to have an "out of production" part, I bet the price per part would be frightening even at qty.

However, Microchip is a great company with a great product- no doubt.

Mr. Short,

Any plans for updating the Renard DMX code to work on 1825? Is that even possible? I ask because I have an idea for a little DMX address duplicator device to allow things like Obey 3 to drive a set of floods leaving them addressed to their unique show addresses instead of having to reprogram to address 1 all the time. It would be nice to not have to use a crystal that scarce these days.

THX, Kirk


Reply
dlovely
Posts: 3167
(@dlovely)
Famed Member
Joined: 17 years ago
CaptKirk wrote:It would be nice to not have to use a crystal that scarce these days.

The current Renard DMX code can run on an 16F688 without a crystal already.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
CaptKirk wrote:If someone had an actual "must have" hardware reason to have an "out of production" part, I bet the price per part would be frightening even at qty.

However, Microchip is a great company with a great product- no doubt.

Mr. Short,

Any plans for updating the Renard DMX code to work on 1825? Is that even possible? I ask because I have an idea for a little DMX address duplicator device to allow things like Obey 3 to drive a set of floods leaving them addressed to their unique show addresses instead of having to reprogram to address 1 all the time. It would be nice to not have to use a crystal that scarce these days.

THX, Kirk

You can do that today with the good 'ol 688 - set it for internal osc at 8Mhz and run DMX code.

edit - d'OH - too slow


Reply
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago

VERY COOL- I will need to whack some hardware together and get coding.


Reply
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago

How easily the code ports over depends on C vs assembler as well as how well it was written in the first place I guess. Some ports may not be trivial, but someone with moderate programming skills should be able to do it without too much bother.


Reply
RichF
Posts: 1356
(@richf)
Noble Member
Joined: 19 years ago

I downloaded the new PShort PIC ASM for the 16F825 this am and tried to do a quick build of the ASM to flash a chip. On each time I get the following error?

Warning[207] C:\USERS\PC\DOWNLOADS\RENARD_1825_20130626_1372291520.ASM 816 : Found label after column 1. (rlf)
Error[122] C:\USERS\PC\DOWNLOADS\RENARD_1825_20130626_1372291520.ASM 816 : Illegal opcode (cur_mask)
Halting build on first failure as requested.

I am sure I am not doing something correctly but can anyone speculate?


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

It worked for me - just got a few warnings:

Warning[202] C:\USERS\BRIAN\DOWNLOADS\RENARD_1825_20130626_1372291520.ASM 459 : Argument out of range. Least significant bits used.
Warning[219] C:\USERS\BRIAN\DOWNLOADS\RENARD_1825_20130626_1372291520.ASM 473 : Invalid RAM location specified.
Warning[219] C:\USERS\BRIAN\DOWNLOADS\RENARD_1825_20130626_1372291520.ASM 598 : Invalid RAM location specified.
Warning[219] C:\USERS\BRIAN\DOWNLOADS\RENARD_1825_20130626_1372291520.ASM 664 : Invalid RAM location specified.
Warning[219] C:\USERS\BRIAN\DOWNLOADS\RENARD_1825_20130626_1372291520.ASM 701 : Invalid RAM location specified.
Warning[219] C:\USERS\BRIAN\DOWNLOADS\RENARD_1825_20130626_1372291520.ASM 702 : Invalid RAM location specified.

but the build was OK using MPLAB 8.60

You have "16F825" in your post Rich - is that a typo? (should be 16F1825)


Reply
RichF
Posts: 1356
(@richf)
Noble Member
Joined: 19 years ago

Yes sorry it is 1825 hard to type one handed while drinking coffee. 🙂

I will try again not sure what is going on.


Reply
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago

Correct tool suite and device selected?

Sent from my AMI-TT2 using Tapatalk 4 Beta


Reply
Page 2 / 3
Share: