Renard - PIC16F688 ...
 
Notifications
Clear all

Renard - PIC16F688 Replacement

23 Posts
11 Users
0 Reactions
9,646 Views
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

Speculation: You don't have the PIC selected properly prior to execution of the build.
The message is saying that it does note recognize "rlf" as a valid command, and thus it is treating it as a label. As a "label" it is in the wrong column to be a label. Thus the message.

I've downloaded the FW and given it a build test.. at first I was getting different errors, but that was a result of having 16F1823 vs 16F1825. Once I changed to the correct part, the errors became warnings (like budude had).

RichF wrote:I downloaded the new PShort PIC ASM for the 16F825 this am and tried to do a quick build of the ASM to flash a chip. On each time I get the following error?

Warning[207] C:\USERS\PC\DOWNLOADS\RENARD_1825_20130626_1372291520.ASM 816 : Found label after column 1. (rlf)
Error[122] C:\USERS\PC\DOWNLOADS\RENARD_1825_20130626_1372291520.ASM 816 : Illegal opcode (cur_mask)
Halting build on first failure as requested.

I am sure I am not doing something correctly but can anyone speculate?


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago

I've done all of my assembling of that code under MPLABX on the Ubuntu OS. What version of MPLAB/MPLABX are you using? I'm wondering if you might have an older version with, perhaps, a corrupt device file.


Reply
RichF
Posts: 1356
(@richf)
Noble Member
Joined: 19 years ago

I am using MPlabe IDE V8.88

If I use MPasmWIN I do not get the error.


Reply
Page 3 / 3
Share: