P. Short wrote:In the 'How To' section of this forum site there is a link to a video providing instructions on how to home etch PCBs.
Great thankyou!
Great work! After thinking I knew how I wanted to add 100 channels this year I have to go back to the drawing board. Thanks for all the contributions.
Any further testing yet Dirk? Is the BOM still in flux?
Skunberg wrote:Any further testing yet Dirk? Is the BOM still in flux?
Hey, Brian.
I'm making boards right now and hope to build and test the following tomorrow:
1. The WiRen module (the actual controller board - I already know this works)
2. The RJ45 board (for controlling external SSRs
3. The LV board (formerly the ULN2803 board) that makes it into an 8-channel LV
4. The PIC board that turns it into a 16-channel controller (uses the RJ45 board, too for all 16 outputs)
5. The SSR4 board that makes it like an SS8 with only 4 of the channels used
6. The LSD board that makes it into an 8-channel LSD board
That's the plan anyway... I'll see how far I get. If it all checks out (and I think it will) I'll probably be able to post the PCB layouts and BOMs in the File Library along with the intended documentation within the next few days.
-dave
dirknerkle wrote:Hey, Brian.I'm making boards right now and hope to build and test the following tomorrow:
1. The WiRen module (the actual controller board - I already know this works)
2. The RJ45 board (for controlling external SSRs
3. The LV board (formerly the ULN2803 board) that makes it into an 8-channel LV
4. The PIC board that turns it into a 16-channel controller (uses the RJ45 board, too for all 16 outputs)
5. The SSR4 board that makes it like an SS8 with only 4 of the channels used
6. The LSD board that makes it into an 8-channel LSD boardThat's the plan anyway... I'll see how far I get. If it all checks out (and I think it will) I'll probably be able to post the PCB layouts and BOMs in the File Library along with the intended documentation within the next few days.
-dave
so basically you will donate the circuitry to print on the single sided PCB copper clad board and then give a bom list so we can order the parts.....if that's true your truly amazing...i would think you would want something for your efforts 🙂
griffixdc wrote:so basically you will donate the circuitry to print on the single sided PCB copper clad board and then give a bom list so we can order the parts.....if that's true your truly amazing...i would think you would want something for your efforts 🙂
Thanks for the nice words, but I didn't invent the circuitry -- I just borrowed a little here, a little there, tweaked a couple things to reformat it into a modular design and did some legwork on proof of concept. In any event, this is the beauty of DIYC -- we all share for the benefit of the whole. 🙂
griffixdc wrote:...i would think you would want something for your efforts 🙂
Glory, prestige, admiration and love - from all of us. The best part, it's tax free!
If I had a quarter of the time you have Dirk... I'd probably sleep more!!!
It's good you do have extra time however so you can grow this "hobby" everyone has
Greg in Canby wrote:Glory, prestige, admiration and love - from all of us. The best part, it's tax free!
reading the PCB layout listings Dirks got quite a bit of pdf files in that section a talented engineer for the light animation community and generous at that. My question for you Dirk is this:
I understand etching the wiring(traces) but how do you etch the words, parts Logo designs ...i see most boards and they have something written on them and usually white in color. How do you do this?
For boards made at a commercial board house, they silkscreen the text and other graphics onto the board; it's a similar process to silkscreening a T-shirt. Ordinarily, it is white ink on the green of the solder mask, but most board houses will offer different colors for additional charges. I used black silk on a white solder mask for my color strips. For home-etch boards, some people will take the board after etching and use another pass of toner transfer (the same way they did the etch-resist transfer before etching) to leave the text in black on the boards.
Another way to do it is to add the text and logos to the copper layer in your layout program; then they end up on the board like any other copper traces.
/mike
