Kelly and Idun - funny comments on the silver spoon and work thing! Hah. No silver here. Got my own spoon though... and no alarm clock. It's like Vegas in my workshop -- no clocks, nothing. And with my eyesight, I can't see the time in the system tray!!! And no windows... I sometimes don't even know what day it is down here!
Anyway, I'll spill the beans a little early here and give you a preview of what I'm working on. This is a modular concept -- more of a system, really, so that's not really new. But this adds some things that are a little unique.. The cards can interconnect with patch cables. I'll explain the pictures below and get into more detail later...
1-WiRen8-module: this is the basic controller. It's a wireless Renard (hence WiRen) and it has only a single PIC, for 8 channels.
2-RJ45_board: this is a daughtercard that can be used when you want to control normal external SSRs, wirelessly, of course.
3-SSR4_board: this is a daughtercard that makes it into a wireless 4-channel SSR. Since the WiRen has 8 channels, the SSR4 board uses its own patch cable so you can choose which four channels the SSR should react to. You might choose 1-2-3-4, or 1-3-5-8, or 1-2-6-7, etc. Any four or fewer channels can be selected.
4-PIC_board: this adds another 8 channels so it becomes a 16-channel controller. The PIC board also has RJ45's on it for controlling external SSRs. You'd connect an RJ45 board to it to get channels 1-8 while the on-board RJ45's have channels 9-16.
5-ULN_board: this utilizes a ULN2803A and a couple RJ45 jacks for powering some LEDs or when you need more signal.
On the drawing board -- the LSD_board will have budude's fine transistor array and voltage regulator for 8 channels when higher-LED power is needed or for those crazy Super Strips. And a high-current SSR board, and a relay board, and a.... (let your imagination soar...)
The point of the WiRen design is that one board doesn't always fit all situations, and by having the ability to mix-and-match the daughterboards only, it affords extra flexibility -- you now only have to build a daughterboard instead of a completely new controller. Connecting the boards will be easy. You'll finally have a use for those old IDE hard disk and floppy drive cables from old computers or you can build your own ribbon patch cables if you like. I don't know about you, but I must have 100 of the darned things around my workshop. Another thing that's important: these boards are all home-etchable, single-sided boards.
ICSP Programming: while it does not have a specific header, all the ICSP programming pins are represented and marked on the WiRen8 module itself, so yes, you'd be able to program your PIC16F688 chips that way.
There's much to do to finalize all this, but hey, SSRs aren't rocket science, nor are ULN2803As, and daisychaining the signal from one pic to the next isn't hard to do, so what the heck? This concept is almost ready... I can hear the questions already... "Will there be a 24 channel version? Will it do DMX? When can I get a board? Will you have a group buy? How many can you plug in at the same time? Who was this Oswald guy and did he act alone?"
The answers to those questions and more will be forthcoming in due time... for now, I have to go etch and build out some boards....
Dirk,
Pretty cool beans.
Are the boards stackable. In other words could I have a RJ45 board stacked with an SSR board?
Dean
Wow, It looks like you've been busy. This controller defiantly has my interest. I already had everything controller wise figured out then You come out with this now I want some of these. I'm defiantly going to follow this thread. Unfortunately current financial situation here may prevent me from building this. The price for the Xbee just doesn't make since with no real need for wireless. I got a bunch of cat-5 for free from my brother who just finished rewiring a local store and brought me all the network cable they striped out. But who knows the year is still young maybe things will change. Anyway looks very interesting.
Tyler
What PCB software are you using to do your layouts with?
glaforce wrote:What PCB software are you using to do your layouts with?
I use ExpressPCB because (a) it's free, (b) it's quick and intuitive, (c) the copper traces print out perfectly and are ready to use as-is for a toner-transfer when home-etching a board.
As good as that is, it sucks if your goal is to job out the resulting data files to any board house other than ExpressPCB, because nobody takes them. They're in a proprietary format that the ExpressPCB people use.
Lastly, ExpressPCB makes it super-easy to order boards from them. Their software will give you price quotes, upload the data and tell you when you'll receive them. I have used their board production services several times and have never been disappointed. Their pricing may be on the high side, but so is their quality and they deliver on time, every time. I'm willing to pay for that.
This not really the right thread for this question but i'm going to ask anyway 8-). Where do you get your supplies for home etching? I used to do some of that and no longer have a supplier for copper clad pc board and so on other then Radio Shack and we just aren't even gonna go there....;)
Sorry for the off topic post.
glaforce wrote:This not really the right thread for this question but i'm going to ask anyway 8-). Where do you get your supplies for home etching? I used to do some of that and no longer have a supplier for copper clad pc board and so on other then Radio Shack and we just aren't even gonna go there....;)Sorry for the off topic post.
Not a problem -- I buy plastic trays and hydrogen peroxide at Target. I buy muriatic acid and rubber gloves at HD or Lowe's. For $20 total you can get set up for quite a long time. I buy copper boards off eBay on sales.
dirknerkle wrote:Not a problem -- I buy plastic trays and hydrogen peroxide at Target. I buy muriatic acid and rubber gloves at HD or Lowe's. For $20 total you can get set up for quite a long time. I buy copper boards off eBay on sales.
thankyou for semi aNSWERING MY QUESTION EVEN THOUGH IT WAS TO REPLY TO SOME ONE ELSES QUESTION NOT MINE 🙂 BUT ANYWAYS AT LEAST IT GOT ANSWERED....holy crap sorry for the CAPs dont mean anything by it just accidently hit the button 🙂
dirknerkle wrote:Not a problem -- I buy plastic trays and hydrogen peroxide at Target. I buy muriatic acid and rubber gloves at HD or Lowe's. For $20 total you can get set up for quite a long time. I buy copper boards off eBay on sales.
the other part to my question was the printing and and the circuit layout...what programs do you use and would inkjet iron transfers work to do this etching?
In the 'How To' section of this forum site there is a link to a video providing instructions on how to home etch PCBs.

