MiniRen8/4
 
Notifications
Clear all

MiniRen8/4

130 Posts
29 Users
0 Reactions
50.4 K Views
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Just a little more eye candy... if a MiniRen8/4XB is good, maybe a Miniren8/8XB with 8 channels is okay too... here's a standalone wireless Renard with a fuse and 8 triacs on a board that's 4-7/8 x 2-7/8 x 1-3/8 high. :mrgreen:

I've got to quit screwing around with this stuff now and start sequencing... only 10 months until showtime!


Reply
Posts: 221
(@stenersonj)
Estimable Member
Joined: 17 years ago

Great work Dirk,

when can we expect the Miniren8/16XB?


Reply
griffixdc
Posts: 2512
(@griffixdc)
Famed Member
Joined: 16 years ago

quick question where did the name renard come from ?


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I've posted the PCB layout, photos, construction and troubleshooting manual for the new MiniRen8/8XB in the COPPER section of the file library. I am undecided whether I will have any commercial boards made for this project, as I have a working prototype and it's all I need for the coming year.

This more-or-less concludes all the MiniRen development for the foreseeable future. I only created this as it was a natural offshoot from the MiniRen8/4XB, which is essentially a wireless 4-channel SSR. I see no reason to produce a 16 or 24 channel unit as the very prospects of that many channels and the board real estate required for them removes "mini" from the concept. Wayne's SS16 and SS24 are such great boards that adding a Ren-W to them is all that's necessary to make either of them wireless.


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I was cleaning up here at Dirknerkle's Experimentorium, Ice Cream and Generally Worthless Device Factory and saw a lonesome, empty CG-1000 case sitting in the corner. Hmmmm... it just so happens that all of the WiRen system boards fit right inside! Now I have a truly portable "Uni-Renard Controller" for testing virtually any kind of output: incandescents, LEDs, strobes, external SSRs, and even relay-switchable gear such as motors. I can run the sequence in the lab, transmit it out and haul this out to the garage, the shed, front yard, back yard, wherever the display is stored, work on it and test it regardless of what kind of display it is. I no longer have to figure out how to get it down two flights of stairs and around a corner to the workshop. Ahhhh, life is good 😀


Reply
IdunBenhad
Posts: 1603
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:

dirknerkle:
This more-or-less concludes all the MiniRen development for the foreseeable future.

Just can't keep his fingers out of the pie, can he?

Nice work, dirk. A portable lab should be in everyone's future. Especially useful in those last hurry-up days before turn-on when you're wading through snow and ice and cold trying to get something to work.

Now I know why we winter in Yuma, AZ. I don't even want a snow machine!


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
IdunBenhad wrote:

Just can't keep his fingers out of the pie, can he?

Nice work, dirk. A portable lab should be in everyone's future. Especially useful in those last hurry-up days before turn-on when you're wading through snow and ice and cold trying to get something to work.

Yah, it's sometimes hard to put a project down when you keep getting ideas... Here's the latest one...

I took all the PCBs for the WiRen system and fit them all onto one board. The board measures 6.5"W x 7"H and instead of building seven boards separately, it's all on one. Power and ground are interconnected to all the seven modules, and there's an external power tie with an LM323T that can produce 5vdc at 3A if you care to go that far and really test some things out. If you built it you'd essentially have several controller types on one board: 8 channels of a Ren64, 8 channels of a Ren24LV, 8 channels of a Ren48LSD, 8 channels of a Ren24, an SS8 or a Ren16, or 8 channels of a Ren64 plus an SS8 at the same time, or the ability to control two relays -- all wirelessly. It gets kind of mind-boggling after a while thinking about the combinations you could come up with.

Anyway, If you're interested, you can etch your own "WiRen AllInOne" controller -- the ExpressPCB layout is in the File Library in the WiRen section. If you're interested in a production board, let me know. We could have a short run made but that aren't gonna be cheap... at 12 boards it works out to almost $34 each and even at 36 boards, it's still $20 a pop. Don't worry, I won't hold my breath on that one... A picture of the board layout is below...


Reply
tweist
Posts: 394
(@tweist)
Reputable Member
Joined: 18 years ago

Now that you are done with this project, I have one more idea for the "allinone". Would it be possible to feed all of the modules at the same time? That way you would not have to put jumper wires from the controller to the output board you want to try, it would already be running. Just a thought. Oh and I was thinking down the same lines you were on these module type systems, I just had not gotten that far. Thanks for doing all the work for me. Now I have a lot more time to make it work and will not have to design much.
They all look great.


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
tweist wrote:Now that you are done with this project, I have one more idea for the "allinone". Would it be possible to feed all of the modules at the same time? That way you would not have to put jumper wires from the controller to the output board you want to try, it would already be running. Just a thought. Oh and I was thinking down the same lines you were on these module type systems, I just had not gotten that far. Thanks for doing all the work for me. Now I have a lot more time to make it work and will not have to design much.
They all look great.

I've thought about that, and yes it's certainly possible to do it with a production two-sided board, but that takes it out of the realistic home-etch world. That's why I went to using old IDE cables to connect them -- it was the cheap "top-side" solution. I haven't invested the time in working it up because I don't believe there's anywhere near enough interest in the all-in-one to make it a viable order. To get the price down to $15/board, I'd have to order 70 of them and after everybody who wanted one got their's that would mean I'd end up with $1K wrapped up in a board with no way to recover the cost. It's just a SWAG but I'm pretty sure Mrs. Dirk might have a little problem with the economics of the idea 😆

I figured that if it was important enough to a few people (maybe as many as 12) to have a universal test bench like this, they'd be willing to spend $34 or so to get the board and if there wasn't enough interest to do that, at least there's a workable home-etchable board for those who care to go the next step on their own.

It's a good idea, Ted -- but it just doesn't work economically...


Reply
tstraub
Posts: 525
(@tstraub)
Honorable Member
Joined: 18 years ago
tweist wrote:Now that you are done with this project, I have one more idea for the "allinone". Would it be possible to feed all of the modules at the same time? That way you would not have to put jumper wires from the controller to the output board you want to try, it would already be running. Just a thought. Oh and I was thinking down the same lines you were on these module type systems, I just had not gotten that far. Thanks for doing all the work for me. Now I have a lot more time to make it work and will not have to design much.
They all look great.

I haven't done the math but I would assume running all output cards at once would exceed the maximum current ratings on the PIC.


Reply
Page 10 / 13
Share: