Hi: See this thread. It explains the current draw and calculations very well. Forum:Hardware:Pixels and Pixel Controllers: Amp draw on WS2811 12V ...
Hi: Also, don't forget that the MINUS or ground lead or return lead (all one and the same) must carry the current for the entire string of pixels. At...
HI: Electronics are Electronics and as such are unpredictable. Any device can fail at any time due to any number of conditions. Even though the manu...
Hi: My megatree base is 3/4" pvc. Uses 16 sections with 22.5 degree elbows. 8 of those sections have Tees with a PVC stub about 8" long. I drive re...
Hi: This whole thread is very interesting and I have learned a lot from it. When is comes to "low cost" (cheap?), I am El Cheapo Numero Uno. I haunt...
Hi: I have been working on "Tune To" signs for awhile. My first attempt was to use an old "Marlboro" Moving Message sign, which had programmable mess...
Hi (again) VLP SWR Meter is under: Radio Waves "VLP SWR METER" Date: 04-7-2012 My Gosh. That's a long time back!!!!!! I have not yet located who ...
Hi: Note the power rating is .2 watt to 5 watt. If you are using a transmitter in that range, OK, but if you are using a FM01 or FM02 or other low po...
Hi: Wow, what a sad commentary on the younger people in this country. Unfortunately, it can be related to the lack of teaching our schools are now tr...
Hi: Where did you obtain the transmitter? Even though my little FM01 is working great ( over 1/2 mile on a dipole ant inside a building) I am always ...
Hi: Can't really answer most of your questions, BUT: I made 20 luminaries using "Plastic Cardboard" available from Home Depot. This is almost like Co...
Hi: I've commented on this before. First, I'm a Shriner and we work for donations to the Shriners Childrens Hospitals. With that said: I do not b...
Hi: One Question: One FYI; Question: Do you happen to know if the Generic Serial Port in Vixen 3 is different than the one in 2.5.08? I have been t...
