MiniRen8/4
 
Notifications
Clear all

MiniRen8/4

130 Posts
29 Users
0 Reactions
50.4 K Views
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
tstraub wrote:I haven't done the math but I would assume running all output cards at once would exceed the maximum current ratings on the PIC.

Yep, that's the other consideration.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

It would not work anyway (at least directly) - - some of the modules are DC and require flipped outputs from the PIC...


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
budude wrote:It would not work anyway (at least directly) - - some of the modules are DC and require flipped outputs from the PIC...

Yes, thought of that... but the PIC board would have a PIC that was flashed with the proper firmware to handle that... so with a 16-channel profile/sequence running, channels 1-8 would be the normal polarity from the first PIC on the WiRen module and and 9-16 would be inverted polarity to work with the LSD and LV boards from the second PIC on the PIC board.

Works fine, by the way -- that's how I have my prototype set up... 😀 (The staff works overtime at DEICGWDF...)


Reply
Posts: 987
(@wirewrap)
Noble Member
Joined: 18 years ago
dirknerkle wrote:
...

Works fine, by the way -- that's how I have my prototype set up... 😀 (The staff works overtime at DEICGWDF...)

Yeah, I heard that they are getting slave wages, too. 🙄 😀 🙄 😀

🙂


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
WireWrap wrote:Yeah, I heard that they are getting slave wages, too. 🙄 😀 🙄 😀

🙂

Hah... but we get our own sets of anklet irons... and a plate of lutefisk every other Tuesday...


Reply
Mactayl
Posts: 2491
Guest
(@mactayl)
Member
Joined: 17 years ago
dirknerkle wrote:Hah... but we get our own sets of anklet irons... and a plate of lutefisk every other Tuesday...

LUTEFISK !!!!! aaaaaahhhhhhh.:shock::shock::shock:


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
Mactayl wrote:LUTEFISK !!!!! aaaaaahhhhhhh.:shock::shock::shock:

I know, you love it. You don't have to thank me for bringing it up.... which, come to think of it... happened the last time I ate the stuff... 😯


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Here's a completed production board. I have about 25 boards left for those who may want them. Pricing is in the Group Buy forum for the MiniRen8/4XB.


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Work never stops here at Dirknerkle's Inventorium and Generally Worthless Device Factory...

I decided to put some color on either side of my house this year, and I had some Rainbow Floods that I hadn't built, so naturally, I had to build those puppies. But what to drive them? I have a couple of Budude's LSD boards, but I thought it was kind of silly to put a two 48-channel LSD boards out there when all I wanted was one 3-channel flood on either side of the house. (I may be dense, but I'm not completely stupid!)

And because I'm 100% wireless, I decided an 8-channel wireless LSD board was in order. I took the MiniRen8/4 layout, made a few changes, had a few prototypes made and... voila! The MiniRen8XBLSD board is born! Size: 2.9" x 3.5", runs off a 12VAC or 12VDC wall wart, powers up to two Rainbow Floods per controller, and includes a jumper to send either 5 or 12vdc out the RJ45 jacks in case 12vdc is too much juice.

Because I owe a lot of credit to my good friend Budude, I included his name on the board, too.

Now I'll get back to the firmware for the dumb triks board... Things just never stop here at DIGWDF... :mrgreen:


Reply
Greg in Canby
Posts: 854
(@greg-in-canby)
Prominent Member
Joined: 19 years ago

You guys just oooooooze cool don't you.

Nice, very nice!

Greg


Reply
Page 11 / 13
Share: