FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.3 K Views
Posts: 42
(@vitohgrind)
Trusted Member
Joined: 8 years ago
scooter_seh wrote:The newest revision of the PB16 is Rev G and the only difference from Rev F was switching to screw type input power terminals. The PB16 is pocketbeagle based. The first revision of the PB16 with most the "newer" features(buttons, EEPROM) is the Rev F. I personally still use mostly Rev C and D PCBs(which I don't recommend). The BBB16 is at Rev 4(I switched number scheme for some dumb reason). I personally have not built a BBB16, I have relied on others for most of the feedback. I am thinking about changing the expansion header to the new Falcon v4 pinout. Probably not many other big changes as I am pretty happy with the feature set and it fits most of my needs at the moment.

Thanks,
Scott

Well, I've already pulled the trigger on the purchase so we'll see! Here are a couple of the boards. These are a PB16 Expansion and 16 Expansion and both say v3, vice a lettered rev. However it does have buttons, so I assume it's a newer version?

Sent from my SM-N986U using Tapatalk


Reply
Posts: 79
(@bobsmith)
Trusted Member
Joined: 11 years ago

Geez, I wish I realized this project existed 3 days ago, when I just placed a JLCPCB order for line drivers for my meteor tubes, and a meteor tube backplane board, which is shipping today. Oh well, another $20 on shipping a separate order won't break the bank. I'm glad I added connectors for external data in on my backplane board - then instead of populating it with a espixelstick, I can just feed data in from one of these boards instead.

I was running everything on ESPixelSticks (custom ones that I laid out and had made at JLCPCB including SMT placement that were WAY cheaper than buying the official ones) last year, but was starting to have issues with wifi bogging down. I think switching to ethernet is the clear solution. This seems to be the most cost effective way to do that!

5 PB16's, 5 differential expansion boards, and 20 differential receiver PCBs ordered. Now I just need to get all the BOM stuff ordered.
I'm surprised no one has a BOM setup for LCSC, JLCPCB's component distributor branch.

If anyone is curious, this is my meteor tube base board, and meteor tube line driver board

meteor tube base

meteor buffer panel

Youtube video here (that isn't that great, but you get the idea of what it looks like): https://www.youtube.com/watch?v=q9StRPlObKk

I got the idea from this board in another thread. The meteor tubes are WS2815 strip glued back to back in 1" pex water pipe. One 2 pair cable runs to each tube, one larger gauge pair for power, and one pair for data in and data out. The data in line feeds both strips in parallel, and then a wire between the two strips glued together brings the data out of the end of the strip, back to the backplane board, and back out to the next tube. I was having issues with the waveforms of the data lines looking pretty awful with the last LED in each tube driving the cable back to the backplane, so I came up with the buffer board that uses a CD4050 as a buffer / line driver and it improved the waveforms immensely. I didn't have any actual issues, but it was right on the verge of not working, and I wanted to be able to have some slightly longer cables to get more of the tubes higher up in the tree this year. If I had 3 pair cable, I would've used differential drive to drive data in and out, but as the strange cable I picked up surplus cheap is only 1 power pair and 1 data pair, I had to stick to single ended.

The backplane board I decided to go with 4.2mm Molex Mini Fit Jr. connectors (same ones used for ATX power connectors) as I wasn't really happy with my hand assembled on breadboard backplane boards last year with the knockoff Chinese phoenix connectors.

I was thinking of making differential driver and receiver boards to be able to drive some longer runs, but then I ran across this project, and it also allows everything to be driven from wired ethernet using FPP, so it's just win win!


Reply
Posts: 87
Topic starter
(@scooter-seh)
Trusted Member
Joined: 12 years ago

I have started redoing the BBB16 to add some additional features. As Pocketbeagle raise in price, I may start using the BBB16 more in my display. I attached a tentative design, with the new layout I plan on using so far. I have to route the PCB so things may change. The biggest change is moving the BBB to the bottom. I added a built in receiver out port and may add another if I can fit it. To do this I removed one serial RJ45 and I am thinking about removing the other one too. I added more buttons and moved the display so it doesn't hang off anymore. If anyone has any thoughts on additional features, let me know and I can try to add it.

I have started converting some of the PCB designs to surface mount designs(SMD) for easier manufacturing. I had a dream of selling boards someday to make money but now I think I will just open source all the SMD designs and let other people use them. I have a SMD PB16 design that I may open source depending on interest. If you look at the github lately, I have started adding Falcon v4 headers to the expansion PCBs. These designs are untested so far but I have some on order to test. The Smart Receiver development has stalled due to my inability to get it working. I start school tomorrow, so it may be a next year project. If anyone has any suggestions for improvement to other existing PCBs please let me know, I am always looking for new ideas.

Thanks,
Scott

BBB 16

Reply
Posts: 128
(@sctwohig)
Estimable Member
Joined: 10 years ago

Scott,

Love these boards. Any Plans to make a bbb 16 Expansion?

Thanks,
Shawn


Reply
Posts: 87
Topic starter
(@scooter-seh)
Trusted Member
Joined: 12 years ago

I assume you want a BBB based board with two or three expansion port?

sctwohig wrote:Scott,

Love these boards. Any Plans to make a bbb 16 Expansion?

Thanks,
Shawn


Reply
Page 77 / 126
Share: