FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.3 K Views
Posts: 2
(@vik0dmk)
New Member
Joined: 5 years ago

Newbie here.. is it possible to use BBB16v2 without FPP license and only as standalone for data with xschedule running computer? Still waiting on license, send email on Friday.

I tried test mode directly from controller limiting pixels to 50 on three ports, but pixels behave weird and not all 50 turn on and sometimes only one color and few LEDs.
From xlights directly, test runs but nothing on pixels. It always show red status for controller although it is able to upload and update settings / ports. Could this be also related to license issue?

Also, is there a way to do test easily and verify all ports are working without xlights upload?


Reply
joeytx
Posts: 249
(@joeytx)
Reputable Member
Joined: 19 years ago

You could try using an older version of FPP, like 5.5.


Reply
Posts: 2
(@vik0dmk)
New Member
Joined: 5 years ago
joeytx wrote:
You could try using an older version of FPP, like 5.5.

With FPP 5.5 on Beaglebone, do you need to downgrade Xlights to 2022 /2023 version also?


Reply
Posts: 128
(@sctwohig)
Estimable Member
Joined: 10 years ago
vik0dmk wrote:
Newbie here.. is it possible to use BBB16v2 without FPP license and only as standalone for data with xschedule running computer? Still waiting on license, send email on Friday.

I tried test mode directly from controller limiting pixels to 50 on three ports, but pixels behave weird and not all 50 turn on and sometimes only one color and few LEDs.
From xlights directly, test runs but nothing on pixels. It always show red status for controller although it is able to upload and update settings / ports. Could this be also related to license issue?

Also, is there a way to do test easily and verify all ports are working without xlights upload?

If you go in fpp and set the pixel counts to 50 you should be able to test the controller. I use many variants of this controller and because of my odd setup I currently dont use the xlights visualiser, so I just manually configure the output pixel ports.


Reply
Posts: 128
(@sctwohig)
Estimable Member
Joined: 10 years ago
hilbert wrote:
somebody who has build the pi adapter i dont get it working using dif expasion and reciever out i have power leds but no signaal

I have used the Pi Expansion with most of the expansion boards with no issues.


Reply
Page 126 / 126
Share: