FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.3 K Views
Posts: 42
(@vitohgrind)
Trusted Member
Joined: 8 years ago

Hi all, I found some of these for sale and I'm interested in buying so I can convert my show that was run exclusively on ESPixelSticks to running on Ethernet due to the hiccups I was having. Before purchasing, I just want to get a couple questions cleared up or confirmed:

1) Is the board/series still being dev'd or supported? (seems like yes based on the activity here)
2) Ethernet support can be added via USB dongle correct? If it's currently set up for wifi do i need to reflash to switch to Ethernet?
3) How would I know the generation of the board? Is it printed on them? They're listed as v3 but I'm looking thru the github it doesn't say that's the current version.

Thanks for all your help!


Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

Hi and welcome!
I really like this project. I used a combo of Scott's boards to run my show last year and will do so again this year. I'll give your questions a shot.
1) As far as I know Yes. Scott is still working on smart receivers, I Think.
2)Yes. Either use a usb wifi adapter or usb to ethernet adapter. No reflashing.
3) The version is printed on the board. Not sure what current version is. They are all great.

Don't hesitate to upload gerbers to the suggested web site to look, or Order the boards.
Hope this helps.


Reply
Posts: 42
(@vitohgrind)
Trusted Member
Joined: 8 years ago
rayhjr wrote:Hi and welcome!
I really like this project. I used a combo of Scott's boards to run my show last year and will do so again this year. I'll give your questions a shot.
1) As far as I know Yes. Scott is still working on smart receivers, I Think.
2)Yes. Either use a usb wifi adapter or usb to ethernet adapter. No reflashing.
3) The version is printed on the board. Not sure what current version is. They are all great.

Don't hesitate to upload gerbers to the suggested web site to look, or Order the boards.
Hope this helps.

Thanks for the welcome! This project definitely seems up my alley. I built most of the pixelsticks I use in my show myself, so there's something cathartic about closing the loop on this DIY hobby with member-dev'd controllers.

Reading thru the early few pages shows there are some changes, but it does seem that on the whole they're good. I'm just curious if there are any fatal-ish flaws in a certain version I need to avoid.

These just run standard FPP, right?


Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

Nothing fatal that I'm aware of. Scott is quick to make changes as soon as a something is brought to his attention.
Yes. FPP for Beagle.


Reply
Posts: 87
Topic starter
(@scooter-seh)
Trusted Member
Joined: 12 years ago

The newest revision of the PB16 is Rev G and the only difference from Rev F was switching to screw type input power terminals. The PB16 is pocketbeagle based. The first revision of the PB16 with most the "newer" features(buttons, EEPROM) is the Rev F. I personally still use mostly Rev C and D PCBs(which I don't recommend). The BBB16 is at Rev 4(I switched number scheme for some dumb reason). I personally have not built a BBB16, I have relied on others for most of the feedback. I am thinking about changing the expansion header to the new Falcon v4 pinout. Probably not many other big changes as I am pretty happy with the feature set and it fits most of my needs at the moment.

Thanks,
Scott

VitoHGrind wrote:Thanks for the welcome! This project definitely seems up my alley. I built most of the pixelsticks I use in my show myself, so there's something cathartic about closing the loop on this DIY hobby with member-dev'd controllers.

Reading thru the early few pages shows there are some changes, but it does seem that on the whole they're good. I'm just curious if there are any fatal-ish flaws in a certain version I need to avoid.

These just run standard FPP, right?


Reply
Page 76 / 126
Share: