Another Simple Rena...
 
Notifications
Clear all

Another Simple Renard

84 Posts
21 Users
0 Reactions
34.2 K Views
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago

I did a little more condensing of parts and managed to squeeze a 250ma transformer onto the PCB which now would have enough current for the VO2223A's and also accommodate a RenW for wireless operation. Just in case anyone was wondering it looks like some of the resistors and BR1 are touching the transformer,,, they are not that is just the outline of the core that is actually raised off the PCB by about 3/8". I'm still not sure if I want to use the VO2223A or stay with the original TO92 triacs at this point until my VO2223A's come in so I can do some testing. Also we are not even sure if there will be enough interest to continue development of the Simple Renard LCC. BTW these are just rough drafts of the board and they are not final.


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago
Mactayl wrote:I did a little more condensing of parts and managed to squeeze a 250ma transformer onto the PCB which now would have enough current for the VO2223A's and also accommodate a RenW for wireless operation. Just in case anyone was wondering it looks like some of the resistors and BR1 are touching the transformer,,, they are not that is just the outline of the core that is actually raised off the PCB by about 3/8". I'm still not sure if I want to use the VO2223A or stay with the original TO92 triacs at this point until my VO2223A's come in so I can do some testing. Also we are not even sure if there will be enough interest to continue development of the Simple Renard LCC. BTW these are just rough drafts of the board and they are not final.

On-board AC Operation Now right? Did I miss the fuses?


Reply
mlkren
Posts: 745
(@mlkren)
Prominent Member
Joined: 16 years ago

There is one the top right F1 and one the bottom right F2, each 5A's.


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago
mlkren wrote:There is one the top right F1 and one the bottom right F2, each 5A's.

Good Lord. I printed it out and still missed them. I was looking for Clip type, not the tower style.

Thanks for that.


Reply
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago

I am thinking about changing the fuse holders to 5mm x 20mm fuse clip type.. I do not like the stand up type,,, but they sure save space,, but cost more. Also I will up the fuse rating to more like 7 amps per bank,, need to check trace widths first.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

You've discarded the idea of using an in-line fuse to put the oness on the end user?


Reply
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
dirknerkle wrote:You've discarded the idea of using an in-line fuse to put the oness on the end user?

Dave I was thinking of putting PCB mount fuse clips on the PCB, I guess I just did not make that very clear on my last post.:hmm:


Reply
Posts: 3277
 Jrd
(@jrd)
Famed Member
Joined: 19 years ago

So what is the max load per channel? Sorry if I just missed it.


Reply
tstraub
Posts: 525
(@tstraub)
Honorable Member
Joined: 18 years ago

This board is still in prototyping so there is not an exact max current per channel spec. With the PhotoTriacs that are currently on the schematic It would be right around 1amp/channel absolute max. the concept is to make it drive small props like candy canes or 1-2 100 count mini incandescent light strings. So the target is somewhere around 500mA up to 1 Amp.

Tyler


Reply
Posts: 3277
 Jrd
(@jrd)
Famed Member
Joined: 19 years ago

Ahh, PhotTriacs, I was wondering what those were.

.5-1 Amp sounds pretty good, thanks Tyler.


Reply
Page 5 / 9
Share: