Another Simple Rena...
 
Notifications
Clear all

Another Simple Renard

84 Posts
21 Users
0 Reactions
34.2 K Views
Posts: 46
(@davron12)
Trusted Member
Joined: 15 years ago

Oh sweet. I thought I missed something like that configuration didn't work or something. I'm trying to get my 16 LCC's working and almost there. No offense to you, but it's been a little difficult because I hadn't been able to find any documentation. I'm so happy I stumbled across this thread yesterday and it's helped tremendously. Wasn't finding it by searching within this site. Found it using google. Once I get them working, I'll update the wiki unless you're already working on that. The fw posted in 75 is the latest, right? Everything else I've found (in other threads and the library) have been older.

Do you happen to have an updated schematic? I'm trying to troubleshoot my boards and it looks like the one posted at the beginning of this thread is a little outdated. Also, when running in DMX mode, should RX/TX led flash as it does while running in Renard mode? Mine's not flashing but I wasn't sure if that was misleading me. This is my first year switching over to DMX, so I have not experience with that.


Reply
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
davron12 wrote:Oh sweet. I thought I missed something like that configuration didn't work or something. I'm trying to get my 16 LCC's working and almost there. No offense to you, but it's been a little difficult because I hadn't been able to find any documentation. I'm so happy I stumbled across this thread yesterday and it's helped tremendously. Wasn't finding it by searching within this site. Found it using google. Once I get them working, I'll update the wiki unless you're already working on that. The fw posted in 75 is the latest, right? Everything else I've found (in other threads and the library) have been older.

Do you happen to have an updated schematic? I'm trying to troubleshoot my boards and it looks like the one posted at the beginning of this thread is a little outdated. Also, when running in DMX mode, should RX/TX led flash as it does while running in Renard mode? Mine's not flashing but I wasn't sure if that was misleading me. This is my first year switching over to DMX, so I have not experience with that.

Sorry,, I have not had a chance to add info into the Wiki,, here is some info that should help,, BTW the MPLAB file is setup for 57.6k baud and DMX is not working correctly at the moment so I would recommend you do not use it.. You will have to put a shunt across JP1 pins 4 and 5 and a shunt across JP2 pins 2 and 3..

SR LCC 16 v.1 Place1
SR LCC 16 v.1 Schematic1
SR LCC 16 v.1 View1

Reply
Posts: 46
(@davron12)
Trusted Member
Joined: 15 years ago

Thanks Mac. You don't know how useful that info would have been a few days earlier. Lol. I eventually figured the jumpers out on my own through a combination of tracing, wonder why I wasn't getting a signal at pin 18, and then checking out the other simple renard (rgb & 32) documentation to try to double-check my findings. I think I've got all 20 boards working in the renard mode.

It also dawned on me why I wasn't getting a DMX signal, data being on wires 1 & 2 (dmx) vs 5 & 4 (renard). When you say DMX isn't working correctly, should it be working at all and just buggy, or not at all? I've got nothing happening except the rx/tx light staying on constantly and the status light turning off. The DMX signal going into the board is from a cat 5 cable that I've mapped 1->5, 2->4, 4->2, 5->1, and kept the other wires the same. Was I missing anything else?

Also, why not throw the start address in Renard mode into the eeprom too? That's such a handy little feature.

I'm giving in and running 2 cables out my house (one for PixelNet boards and one for Renard boards) since you're saying RenDMX isn't ready for this board yet.

Thanks again for all your work on this board.


Reply
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
davron12 wrote:Thanks Mac. You don't know how useful that info would have been a few days earlier. Lol. I eventually figured the jumpers out on my own through a combination of tracing, wonder why I wasn't getting a signal at pin 18, and then checking out the other simple renard (rgb & 32) documentation to try to double-check my findings. I think I've got all 20 boards working in the renard mode.

It also dawned on me why I wasn't getting a DMX signal, data being on wires 1 & 2 (dmx) vs 5 & 4 (renard). When you say DMX isn't working correctly, should it be working at all and just buggy, or not at all? I've got nothing happening except the rx/tx light staying on constantly and the status light turning off. The DMX signal going into the board is from a cat 5 cable that I've mapped 1->5, 2->4, 4->2, 5->1, and kept the other wires the same. Was I missing anything else?

Also, why not throw the start address in Renard mode into the eeprom too? That's such a handy little feature.

I'm giving in and running 2 cables out my house (one for PixelNet boards and one for Renard boards) since you're saying RenDMX isn't ready for this board yet.

Thanks again for all your work on this board.

20 Boards...:omg:

The problem with DMX is there is a lag when running a sequence at a fast rate,, we do not have time this year to fix that bug. So I would use them at 57.6K or 115k baud which works just fine,, I use the 115k baud.
BTW. That thought has come up before about changing the start address on the fly,,, something we will look into
Thanks again for interest in the Simple Renard's, we have a new line of them coming out next year..:biggrin:


Reply
Page 9 / 9
Share: