Hi.. would be interested in one of you bbb16 boards.. I already have, the BBB. If available would you post to a UK…. Message me if any left. Thanks D...
May be interested in a bbb16 board
scootchu wrote:I just used Scott's recommendation, jlcpcb.com. Orders are filled quickly and you get a jigsaw puzzle of their plant in the box 🙂 . F...
scootchu wrote:Hey Derek, I messed around quite a bit with this and the best I could do was get the cape identified. I could not burn the eeprom to th...
scootchu wrote:I built a BBB16 and have PB16 boards coming. Everything seems to be working just fine. I haven't been able to load the eeprom.bin file....
ukdel wrote:update ... Well i tested the decoder with a USB/DMX dongle and was able to eliminate that from being the problem. SO this points back to t...
update ... Well i tested the decoder with a USB/DMX dongle and was able to eliminate that from being the problem. SO this points back to the output fr...
I have the BBB16, with expansion and differential reciever output and they all work great.. (note there is a bit of a modification to do for the BBB16...
yes the display does hang from the back..it doesnt have any fixings apart from the connection pins.. but can be moved else where by using flying leads...
ukdel wrote:It maybe that I have recently been skipping the updates to Xlights. I have just seen that the update to Xlights (2021.07) now has the BBB1...
ukdel wrote:Good afternoon from the UK. Well I have now finished my BB16 board. .. I think I have loaded FPP correctly on Beaglebone black. I have loa...
scooter_seh wrote:I have been working on a Smart Receiver. The Smart Receiver is still very much a work in progress. My plan was to make a 12 output r...
scooter_seh wrote:I have been working on a Smart Receiver. The Smart Receiver is still very much a work in progress. My plan was to make a 12 output r...
Hi Scott.. I am awaiting the BBB16 boards from JLCPCB but noted that around 18 Feb 21 you seem to have updated the Github, with a pushbutton/GPIO modi...
woganaga wrote:Ahh! I was not aware that board was out there - I see it in the GitHub now... so I take back my comment! As for the visualizer I ha...
