FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.9 K Views
Posts: 19
(@ukdel)
Eminent Member
Joined: 10 years ago
ukdel wrote:It maybe that I have recently been skipping the updates to Xlights. I have just seen that the update to Xlights (2021.07) now has the BBB16 board listed in it .. and may solve the problem. Will get back to you if it does.
Derek,

Duh.. how silly can ya get. I must write out 100 times... "you must update xlights regularly" !! The BBB16 configuration on the controller choice (FFP - BBB16) in Xlights did it! ... and of course you also need to run FPP in bridge mode if I want to run sequences directly from Xlights.
Well its been a learning curve and now I understand things a little more.
What a great Project.
Thanks Scott.

Derek


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago
scooter_seh wrote:I have been working on a Smart Receiver. The Smart Receiver is still very much a work in progress. My plan was to make a 12 output receiver with all "A, B, & C" outputs all on one PCB. I am having issues with the firmware, I cannot get it working on the STM32 Nucleo dev board. I have no real embedded programming experience besides Arduino, so it has been a challenge fo me. After the Pi Pico was released, I started redoing the Smart Receiver to use the Pico as I thought it may be easier. I still don't know what direction is better the STM32 or the PI Pico. If anyone has any thoughts or suggestions, please let me know.

Thanks,
Scott

Cool, thanks for the info. I have only done basic programming with microcontrollers.


Reply
Posts: 22
(@woganaga)
Eminent Member
Joined: 6 years ago

Hey guys... Posted a mounting bracket for the PB16 to Thingiverse to mount in the $9 Harbor Freight Ammo box enclosure in case anyone is using same enclosure. https://www.thingiverse.com/thing:4807955

IMG 3677

Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Does this mount accommodate the optional OLED display?

woganaga wrote:Hey guys... Posted a mounting bracket for the PB16 to Thingiverse to mount in the $9 Harbor Freight Ammo box enclosure in case anyone is using same enclosure. https://www.thingiverse.com/thing:4807955


Reply
Posts: 22
(@woganaga)
Eminent Member
Joined: 6 years ago
ukewarrior wrote:Does this mount accommodate the optional OLED display?

Probably not - the led display I believe hangs off the back and there is not much room there. I don’t have one of the displays to test with but when I get home I’ll look at a picture I can probably mivd the mounting holes 1/2 inch to accommodate....

Sent from my iPhone using Tapatalk


Reply
Page 66 / 126
Share: