Good evening .. Looking forward to getting boards from JLCPCB..and all components waiting ready to get on with building this. I am planning to have the BBB16 (yes the full size black beaglebone), with a multi (8 ports plus 2 differential) expansion board and two remote diff receiver boards. Anyway I am now wondering about the practicalities of set up. I fully understand about loading FPP on the BBB, but Iwas watching someone set up from Xlights visualizer (they were using the Falcon controllers), and it all seemed very very simple. Although as you all know there is no option to choose the "Hanson Pb16" controllers on the Xlight controller tab. Upshot is... Is there a very simple set up/crib sheet for setting up the PB/BBB 16 and expansion cards in a practical sense with the bonus of utilising Xlights... Many thanks Scott for sharing this great project.
ukdel wrote:Good evening .. Looking forward to getting boards from JLCPCB..and all components waiting ready to get on with building this. I am planning to have the BBB16 (yes the full size black beaglebone), with a multi (8 ports plus 2 differential) expansion board and two remote diff receiver boards. Anyway I am now wondering about the practicalities of set up. I fully understand about loading FPP on the BBB, but Iwas watching someone set up from Xlights visualizer (they were using the Falcon controllers), and it all seemed very very simple. Although as you all know there is no option to choose the "Hanson Pb16" controllers on the Xlight controller tab. Upshot is... Is there a very simple set up/crib sheet for setting up the PB/BBB 16 and expansion cards in a practical sense with the bonus of utilising Xlights... Many thanks Scott for sharing this great project.
The beagle bone black has a different pInout and footprint from the pocketbeagle. The pb16 board accommodates a pocket beagle only. The multi expansion board connects to the pb16 not to a BBB. Is your plan to have a breakout board that jumpers the BBB pins to the expansion board or something like that?
As for xlights there is no difference it can auto configure any FPP based controller. You will need to use the web interface on FPP to setup /enable the outputs on the PB16.
Sent from my iPhone using Tapatalk
There is another board that Scott did for the BEagle Bone Black.. it is in the GitHub..under BBB16. So there isn’t the issue that is suggested in your reply as I am expecting (and am sure that Scott made this so..)that the BBB16 board is compatible with the expansion boards and all other items in the GitHub. My question related really the ease of setting this up in Xlights, especially using the visualiser where ( I don’t think) the PB16 board would be a choice and thus a bit more tricky to map the port outputs.
ukdel wrote:There is another board that Scott did for the BEagle Bone Black.. it is in the GitHub..under BBB16. So there isn’t the issue that is suggested in your reply as I am expecting (and am sure that Scott made this so..)that the BBB16 board is compatible with the expansion boards and all other items in the GitHub. My question related really the ease of setting this up in Xlights, especially using the visualiser where ( I don’t think) the PB16 board would be a choice and thus a bit more tricky to map the port outputs.
Ahh! I was not aware that board was out there - I see it in the GitHub now... so I take back my comment!
As for the visualizer I have not used it but mapping the ports in xlights is pretty easy IMO I don’t think you’ll have a tricky time with it. The visualizer that I do use for the prop setup is gold though.
Sent from my iPhone using Tapatalk
woganaga wrote:Ahh! I was not aware that board was out there - I see it in the GitHub now... so I take back my comment!As for the visualizer I have not used it but mapping the ports in xlights is pretty easy IMO I don’t think you’ll have a tricky time with it. The visualizer that I do use for the prop setup is gold though.
Sent from my iPhone using Tapatalk
What's the visualizer you use then???
