timon
timon
@timon
Noble Member
Joined: Dec 30, 2010
Topics: 165 / Replies: 1984
Reply
RE: Off-Season Uses of Light Controllers

I'm looking at making all of my Outdoor house fixtures and Landscape lighting, both front and back, DMX based so I can control them during shows or of...

13 years ago
Forum
Reply
RE: Manufacturing a new style of ws2812 LED strip. Thoughts?

I think Ray would do this if enough people would buy them. It's an easy change to make especially since the strips are made in 1/2 meter strips. I nee...

13 years ago
Reply
RE: FM02 Getting Old?

A half wave dipole is a tricky antenna for someone without the test equipment and knowledge of antennas to get working correctly. I highly recommend t...

13 years ago
Forum
Reply
RE: Help / Recommendations

Actually higher voltage does not change the current unless there is a switching DC-DC converter in the Pixel, something I'm looking into. The advantag...

13 years ago
Reply
RE: Yet another RS485 pixel Extender/Receiver/Power Injector

They are not UV rated however my plan is to cover them with heat shrink which is UV rated somewhat protect them. Also, although not rated they've been...

13 years ago
Reply
RE: Different motors / controllers for inflatables?

Actually I'd stay with DC blowers and drive them from a DC controller.

13 years ago
Forum
Reply
RE: Add Increment/Decrement option into Output Channle Manager

OMT, I changed the order not the channels. I name all of my channels in such a way that I can sort groups easily. Then I renumber the order and one I ...

13 years ago
Reply
RE: Add Increment/Decrement option into Output Channle Manager

For small sections doing it manually was not a problem. If I had to do a lot then that's a different story. That's why I didn't bring it up at the tim...

13 years ago
Reply
RE: Help needed ** How would you do this? A real MEGA tree.

Nice tree. I think you've got lots of possibilities but the tree looks like, at least from the pictures, it has not been trimmed in quite a while. You...

13 years ago
Forum
Reply
RE: Add Increment/Decrement option into Output Channle Manager

Channel numbers. My bay window had two strings of roughly 100 pixels each. The two outside windows were one string and the center plus the Bay window ...

13 years ago
Reply
RE: Christmas Tree Matrix with offset rows

It will be interesting to read/see your findings.

13 years ago
Forum
Reply
RE: Best New Candy Cane Setup?

I like that. How did you do the mini-trees? Inspector Steve wrote:I used 9 pixel sections from a 150 LED dumb strip controlled by a 27 channel DMX co...

13 years ago
Forum
Reply
RE: Add Increment/Decrement option into Output Channle Manager

I've run into times where it would have be handy to do a decrement when I needed to reverse a section of a string due to how the pixels were laied out...

13 years ago
Reply
RE: Yet another RS485 pixel Extender/Receiver/Power Injector

Only because I just have sketchy information but I do like cliff hangers. When I have complete information I'll post it. BTW, here is the business en...

13 years ago
Reply
RE: Yet another RS485 pixel Extender/Receiver/Power Injector

I'm at Disney California Adventure so I cannot lookup parts I'm using but the optos are logic output type. Mine differ in that the receiver is isolat...

13 years ago
Page 8 / 144