Has anyone replaced the motor in their inflatable with one that is more efficient, or added some intelligent control to theirs? I was looking at my wive's inflatables and wondering why they have to have their motor running full bore all the time. Once inflated it should be possible for them to slow down to a "maintaining" speed I would think. Anyone try doing anything like that?
On a similar note... she was given a new inflatable for Christmas. It is supposedly for outdoor use but has a DC motor with a wall wart to power that specifically states "dry location only" and is CLEARLY not meant for an outdoor outlet. Plus the cord from the wall wart to the motor is a whopping 2 feet long. I am definitely looking to replace this motor with a comparable AC version. I would rather use it as a trial for a more controlled inflatable but i do not want to "risk" her newest one to my tinkering.
Actually I'd stay with DC blowers and drive them from a DC controller.
I have had to throw out inflatables in years past as I was never able to find a replacement motor for them that would actually fit. Things may have changed now. If you are really determined to change the motor I am sure you can do it. Keep us posted on your progress. Anyone who figures out how to save inflatables will surely be appreciated by the masses, I am sure of that.
I have switched out the DC motors for AC, mostly as I have had issues with the DC motors not having enough power to deal with the snow and cold temps. I usually can MacGyver a way to get the AC motor to fit, sometime using PVC pipe to run from the AC motor to the inflatable. So I am sure you can do it also!
As far as a "maintenance" speed I would be careful with that, I think you will find as the inflatables get older they tend to need more air to stay inflated, and after a time not stay fully inflated. You can find many threads on this issue. I have also noticed that on the cold nights (under 20 degrees) my inflatables have a harder time staying inflated.
timpwk wrote:I have switched out the DC motors for AC, mostly as I have had issues with the DC motors not having enough power to deal with the snow and cold temps. I usually can MacGyver a way to get the AC motor to fit, sometime using PVC pipe to run from the AC motor to the inflatable. So I am sure you can do it also!As far as a "maintenance" speed I would be careful with that, I think you will find as the inflatables get older they tend to need more air to stay inflated, and after a time not stay fully inflated. You can find many threads on this issue. I have also noticed that on the cold nights (under 20 degrees) my inflatables have a harder time staying inflated.
And remember if they are fully inflated for more than 4 hours, one should seek medical attention.
sorry.
Tory 🙂
