I'm working on a tree that has offset rows much like the one Bill (BillinSoFL) does on Christmas33021.com.
Each row of pixels is offset from the previous row just like you would layout bowling pins. I'm not sure how well Nutcracker will handle this currently. I think it needs to have the ability when creating a custom model to tell it that every other row is offset so the effects come out correctly.
BTW, there are commercial matrixes, Rose Brand is one, that are laid out this way and they claim that they can display a better picture than a square layout.
The other issue is handling this in HLS, the preview is easy and I think as long as they both are following the same ordering the data import should be fine but just to make sure I'm pointing that out here.
John
timon wrote:I'm not sure how well Nutcracker will handle this currently.
It doesn't know about offset rows. However, most of the fill-style effects look okay from a distance on a larger prop like a tree. It's just the ones where you want crisp lines (like text or borders) that don't look quite as good when viewed from shorter distances.
timon wrote:I think it needs to have the ability when creating a custom model to tell it that every other row is offset so the effects come out correctly.
That makes sense. As a work-around, you could try manually offsetting them using a custom model and then fill in every second cell, but that's a little tedious to set up.
don
It all comes down to spacing and volume of pixels.
@ 1/2 inch spacing 🙂 off setting the pixels will have 0 effect @ 1 - 1.5 inch or greater as Don said
straight lines will look odd.
hahaha... glad you like the idea. GECE bulbs are pretty large so even with big spacing it looks good. Patterns and such are good. Since the shape is irregular text could be rough, but I have plenty of matrix space for that. I use Madrix for my layout so you can create and shape you want, although I put spaces in between pixels so I could get everything to align perfectly.
Here is my Madrix patch for 2013
The more I consider this idea the more I like it.
Thanks for posting this .
I have a sum of extra pixels being that my mega tree was built and created to the limitations of the original e681 controller design .
I will use the on my matrix to test this offset layout design .
For scrolling text i would use every second row and for general effects use all .
If this shows promise I will incorporate this into my Mega tree also.
Richard


