Setting up LOR cont...
 
Notifications
Clear all

Setting up LOR controllers.

4 Posts
2 Users
0 Reactions
1,653 Views
bdeditch
Posts: 82
Topic starter
(@bdeditch)
Estimable Member
Joined: 19 years ago
[#29566]

Could some one point me in the direction of the video that shows how to set up your LOR controllers in Nutcracker/Xlights please. I have 6 of them and would like to use Xlights to do my show next year.


3 Replies
jlowe
Posts: 952
(@jlowe)
Noble Member
Joined: 16 years ago

Not sure about a video, but it's pretty simple.

Have your controllers' unit IDs sequential.

Setup the xlights network to output LOR data to whatever com port your dongle is attached to, and add however many channels you have. That's pretty much it.


Reply
bdeditch
Posts: 82
Topic starter
(@bdeditch)
Estimable Member
Joined: 19 years ago
jlowe wrote:Not sure about a video, but it's pretty simple.

Have your controllers' unit IDs sequential.

Setup the xlights network to output LOR data to whatever com port your dongle is attached to, and add however many channels you have. That's pretty much it.

That is why I was hoping for a video or some type of set by set instructions, I have never done it before, and seems like lots haven't. But I am told it can be done.


Reply
jlowe
Posts: 952
(@jlowe)
Noble Member
Joined: 16 years ago

It's really quite easy. Won't hurt anything to try it out! Several people hear can help you if you run into problems.


Reply
Share: