timbenson
@timbenson
Trusted Member
Joined: Jan 8, 2014
Topics: 2 / Replies: 68
Reply
RE: New to LOR and DMX... Help! Explain Please

Viper2B wrote:Would the E1.31 device need to be connected via USB based LOR adapter or could it be connected via the Cat 5 cable output on my computer...

12 years ago
Forum
Reply
RE: New to LOR and DMX... Help! Explain Please

jeholla wrote:Got a similar question in daisy chaining an lor and renard (firmware flashed to dmx). Can you use the rs485 usb to cat 5 lor dongle and ...

12 years ago
Forum
Reply
RE: Need Help on EL Wire

I have found that EL wire does not hold up to the weather. once moisture gets in it, it corrodes and stops working. The material it's made of just isn...

12 years ago
Forum
Topic
Forum
Replies: 3
Views: 2642
Reply
RE: PixaBulb and GECE Mounting Strip preferred spacing

Does that mean you will no longer offer the old style with 2 inch spacing ? I really like the flexibility you get with those, and to me, it's worth t...

12 years ago
Reply
RE: e682 and powering pixels along roofline

Just as a point of reference, I was able to drive 125 Pixabulbs (12 in spacing) with no power injection off of a single E6804 output. I also just ran...

12 years ago
Reply
RE: Advice needed for a newbie. Pixabulbs or square pixels?

Here are pixabulbs on the peaks and Gutters at 12 inch spacing, and the windows and doors at 10 inch spacing. the peaks and gutters use standard C9 mo...

12 years ago
Reply
RE: DIY LED Express 2015 Pre-Sale Announcement!

Dan@ wrote:What is the length on these 3 conductor waterproof connectors? I just happen to have a bunch of these... They are 18 inches from the ti...

12 years ago
Reply
RE: Electroluminescent in Your Display?

I had some EL in my display a few years ago. I was using it as a outline on wood cut-outs. it isn't too bright, and it didn't hold up well and was un...

12 years ago
Reply
RE: spreading out pixels

Yes, you can extend the wire between pixels. I have sections where there is 5 to 20 feet between pixels and I have no issues. Set up what you want t...

12 years ago
Reply
RE: Questions before ordering a bunch of pixels

DIYLED is very reasonable on shipping. (with Ray, you need to contact him directly to get the better shipping price) . I used Pixabulbs on 12 inch...

12 years ago
Reply
RE: C9 LED Retrofit or C9 Pixels for roof line

I used to use the retrofit C9 Bulbs (5led's per bulb). They are very bright I switched to Pixabulbs this year, which have 2 5050 LED's each in them....

12 years ago
Reply
RE: Minleon C9 Pixels

at the pre-sales you can order custom spacing. I have both 10 inch and 12 inch spacing. Now, in reality, that is the length between the pixels, so c...

12 years ago
Reply
RE: Minleon C9 Pixels

I have 400 pixabulbs on my house. I had 2 early life failures where the red element failed. There have been no failures due to water intrusion. I wou...

12 years ago
Reply
RE: Understanding Universes, Channels, and Grouping

Most Software allows you to set a sequencing channel to a specific universe and address. In addition 3 channels are combined into a "RGB" channel for ...

12 years ago
Page 4 / 5