Am i thinking correct here? I used V3 for '14, but think i missed some obvious stuff.
I have a string of 20 pixels left from an arch. I want to make 5 groups of 4 to put inside plastic pumpkins. Each pumpkin will be couple feet apart. I want to extend the wires between the pixels, put 4 pixels inside each pumpkin, and use them independent. This is possible right? If so, do you have a quick explaination (don't need the splicing part!).
Along the same lines - if i connect 60 pixels together off one plug of E682, and i want 30 for arch 1 and 30 for arch 2, i just create the elements in v3 and the will act like 2 seperate arches - correct?
thank you
Yes, you can extend the wire between pixels. I have sections where there is 5 to 20 feet between pixels and I have no issues. Set up what you want to do and test it. Just assign and group you pixels as needed in your sequencing tool and away you go.
Tim
ok, i have the concept, now i can't get it to work out in Vixen.
Started setting up spookey eyes - same concepts as above.
In display setup, I created a 20 pixel string called spookey_eyes. Only way i could get it was to make a 1 string mega tree with 20 pixels per string. Then I created single item eye_1_left, and eye_1_right. I copied pixel 1 & 2 into eye_1_left and 3 & 4 into eye_1_right.
How do i get preview setup right? I want pixel 1 & 2 to come on with the eye_1_left and 3 & 4 with eye_1_right. If i pick pixel 1, i can draw a circle, but i think i want pixel 2 tied to the same circle. This seems easy enough, i just can't get it right!
I will go back through the tutorial videos, just wondering if someone has the quick solution.
ok let me see if I got this right you want 2 items in your display too be hooked too the same channel click on you item in preview over on left you will have the property box filed in look for the linked elements (Collection) click on it and a box appears on the right click box and a list appears with click on the element you wanna link too that certain item
