evilfish wrote:Do you know how hot it gets in your enclosure? This is just pure curiosity. I never Put a temperature probe in there. But I can tell ...
I have a 6804, 30Amp supply, and a Arduino Uno in a CG1500 , constant load was about 20 amps. No modifications to the Enclosure. Ran all season that...
It Just so happens that on Canada Day, I portaged a Canoe through Canada in the Boundary Waters Canoe Area. Just Got Home yesterday. Tim
2 Big boxes of Pixabulbs and other fun stuff showed up today. Thanks so much ! Tim
Been using the CDI retro C9's for 4 years. Very few issues. about .8% failure rate each year (1000 bulbs deployed) Haven't bought any new ones in ...
Have you considered the Komby Solution ? You use a Arduino UNO with a ethernet shield and a custom shield that Komby sells and a NRF radio modu...
Hey, Thanks for the info on QLC Plus ! I just finished running Sound and lights for a school play, and their light board is NOT RGB savvy and limit...
Ok, so back to Basics. You cannot rely on the wire colors to be correct. Use Pin Position on the RJ45 connector From the LOR Dongle, Data+ is Pin4...
Ummmmm , My username is..... My Name I used to use screen names, but not so much anymore. Tim
Hi, Welcome to the DIY Forum. You can use your LOR RS485 dongle to drive DMX. It will work fine for the Number of Channels you are talking about. It...
Ok, so I hear lots of people say you can't do shimmer and twinkle with DMX. That is not true. However, the way they look does change because the effe...
With the firmware being based on the 6804, can this controller also output DMX ? So it could act as a small E1.31 bridge ?
I believe what Todd is saying is that they use his standard 3-wire waterproof connector, just like the pixabulbs. At least that looks like what is on...
Bought my First one. Let the adventure begin
Neat ! I was wondering when somebody would make a product like this. Now all we need to do is get the next step down to a M6 version ! Hmmm let me ...
