Wow, that's a great deal ! I ordered one up Thanks
Thanks for posting that code. I was able to load it up and it just worked. It's always great to have more options for types of controllers. Tim
the board uses very little power. I can run a RF1, or a RF1-12v with 50 pixels off a 5V 2200mah USB battery for more than 6 hours, Running 5V pixels ...
The Pro Mini is super cheap, and small. I used it for several LED flasher projects. Supports FastLED and Neopixel just fine Tim
It is very easy. You need the PiRTC board from masterdaddy, and you need to be running the new release. (You could wire up the radio without the board...
Thanks ! Upgraded just fine, and it started right up playing the schedule and transmitting using the NRF radio. Tim
Ok, worked the second try, so either I fat-fingered it, or it was a temporary glitch...
Are you having issues with your credit card processing ? Just had one fail on your site, but works fine on amazon.
The way I do this is like this: Add a new device from the pull down, make the device type "DMX universe" set the Universe Number you want to use a...
I'd be in for at least 20 caps
stallionent wrote:Final layout, one question though: Is it OK to use a splitter between controller 1 and 2? If I run a cat 5 from controller 2 ...
Excellent ! I remember the first time I got it working last year, very exciting. Last year I only used it in 1 place to replace some cat5 cabling. T...
I tried last year, but gave up because I couldn't get it where i liked it. Just went with the "All on" white. I too would be interested if somebody f...
stallionent wrote:Note: the clasp on the GC-1500 just bearly clips, Might be the heat? I'm going to use the screw lock. That is why I use a Zip tie ...
The regulator is just a L7809 used to cut the 12V down to 9V for the Uno. While the Uno can use 12V, it runs cooler on 9v. The Arduino has a Etherne...
