Technician
@technician
Reputable Member
Joined: Mar 23, 2015
Topics: 5 / Replies: 361
Reply
RE: led power

Two important things to know. Light bulbs and dumb LED bulbs can be run on unfiltered DC. Intelligent lights require filtered and regulated power. ...

11 years ago
Reply
RE: OpenDMX issue?

In a pinch Aliexpress has E1.31 bridges but only to DMX as far as I can tell. Seems to be only Multicast.

11 years ago
Forum
Reply
RE: OpenDMX issue?

I have two Enttec Open DMX dongles, but have not upgraded to Windows 8 or 10. With all the issues, I'm thinking when I do upgrade to ditch the Enttec...

11 years ago
Forum
Reply
RE: Anyone spot Home Depot Vampire SPT-1 plugs in their stores?

Wonder why the shipping restriction on some states? This item cannot be shipped to the following state(s):AK,GU,HI,PR,VI

11 years ago
Reply
RE: Anyone spot Home Depot Vampire SPT-1 plugs in their stores?

Not quite. The standards have been upgraded for plugs where the cord could be pulled which could cause the wire to pull out of the plug leaving expose...

11 years ago
Reply
RE: Anyone spot Home Depot Vampire SPT-1 plugs in their stores?

I think they are being phased out due to fire safety and failure to get UL, CE, and other safety certifications.

11 years ago
Reply
RE: House Lights

I have considered adding an optocoupler into some standard wall dimmers, or temporally plating off some switches and adding plugs so porch and living ...

11 years ago
Forum
Reply
RE: DMX Flickering?

Since you are visual, and your controller has no DMX out, attached is a template. Your controller, now referred to as a DIMMER to follow DMX conventi...

11 years ago
Forum
DMX
Reply
RE: Components and power injection

A compliment to the lower resistance in copper wire is many LED's will increase voltage drop and become more efficient when cold. This is why it is a...

11 years ago
Reply
RE: DMX Flickering?

jchuchla wrote: going to the device on the orange pair. You can then bring it back down on the same cable on the blue pair. Please don't wire the...

11 years ago
Forum
DMX
Reply
RE: Components and power injection

Pinout is correct. Connection to the E682 should work on an output configured for 1 universe of DMX 512.

11 years ago
Reply
RE: Just add water!

LOL, Forgot to till the soil. Best to plant in the spring. Looks great, can't wait for the video after you get it up and sequenced.

11 years ago
Forum
Reply
RE: Network issue

What worked for me is to leave off the network cable from the show computer. Change access points to the home network to browse and such. Change to ...

11 years ago
Forum
Topic
Forum
Replies: 6
Views: 4907
Reply
RE: 86 RGB LED Stage Light

With DMX, follow the cable recommendations. Twisted pair data, a signal ground if not using shielded, and double check polarity. If the data cable i...

11 years ago
Page 6 / 25