Activity
 
Notifications
Clear all
Technician
@technician
Reputable Member
Joined: Mar 23, 2015
Topics: 5 / Replies: 361
Reply
RE: DIY LED Express Pre-Sale status, PixaBulbs, Summer Pre-sale

My order arrived last week, but unfortunately has some errors. I would recommend a careful inventory when your order arrives. I got 10 strings of 20...

10 years ago
Reply
RE: How to remove interference from multiple strings of WS2811 lights?

If I read the photo correctly, there is a pair of wires from the Arduino going to the barrier strip, turning and attaching to the power with the pixel...

11 years ago
Reply
RE: Licensing Music...

Not sure, but Lights-o-rama had licensed music, so if you check their site, or possibly email them, they may be a quick way to get answers for commerc...

11 years ago
Forum
Reply
RE: How to remove interference from multiple strings of WS2811 lights?

Screwing on my engineer hat, without using a scope to verify, but the most likely cause is power. \ Let me elaborate. All wire has resistance. All ...

11 years ago
Reply
RE: ELF Shirts to put Food on Shelves

2 extra large long sleeve t shirts in red and green for me.

11 years ago
Reply
RE: Any use for old Dish Network Dishes?

To address the range extension of FM.. a 1/4 wavelength of the FM band is about 0.75 Meters which is too large to fit in the reflective pattern of th...

11 years ago
Forum
Reply
RE: Santa Phone

Many answering machines have an announce only option that can take care of the "Heavy Lifting" portion. Either a landline or a SIP VOIP phone on an a...

11 years ago
Reply
RE: Battery powered lights

I found your current draw specification in error. Actual testing results in considerably less than 800 mA power draw. I find they run just fine wh...

11 years ago
Reply
RE: How do you measure the impedance of your antenna system

An impedance mis-match does not affect sound quality in most cases, only the power coupling into the antenna and transmitter heat. Sound quality is r...

11 years ago
Forum
Reply
RE: How do you measure the impedance of your antenna system

Caution on the SWR bridges. Most do not function in the sub watt range. The one noted above is designed for the LOW power. Use of normal ham equipm...

11 years ago
Forum
Reply
RE: E6804 Resistor Networks

If I understand correctly one has a true RS-485 driver chip for driving the outputs and has the resistors. The cheaper version does not nave the driv...

11 years ago
Reply
RE: Battery powered lights

I've had good luck running a Pi off of a "phone power bank" as a 2AH (2,000 mAH) will run for several hours as the Pi model 2 draws about 1/3 amp, so ...

11 years ago
Reply
RE: Help 3D Print flange

This may be cheaper and faster to build out of Plexiglas. Cut and bend the box, Cut and Solvent weld on the bottom and flange. If you want the flang...

11 years ago
Reply
RE: Lighting use for a laser engraver

12X8 is generally pretty small and you will rapidly outgrow it. Mine barely fits a 16 X 11 for a Tune To sign for 10X15 pixel grid on 1 inch spacing. ...

11 years ago
Forum
Reply
RE: Lighting use for a laser engraver

The low price ones in that range are generally desktop units suitable for making rubber stamps and other small engravings. They generally have a lase...

11 years ago
Forum
Page 1 / 25
Share: