Notifications
Clear all

led power

6 Posts
5 Users
0 Reactions
1,872 Views
Posts: 149
Topic starter
(@bob81354)
Estimable Member
Joined: 15 years ago
[#38864]

Hi to all
Can you use the outdoor transformers 120 v. ac. to 12 v. dc. the ones for pathways and gardens to use with 12v. dc. LEDs ,pixels ?
What is the differences ?


5 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

if it is 12v output then you I dont see why you should have a problem just have too make sure it has enough alps too run what you need too run


Reply
Posts: 94
(@wdmountaindad)
Estimable Member
Joined: 13 years ago

The difference is that most landscape lights use a 120v to 12v ac transformer, note not dc that is needed for leds or pixels.


Reply
Posts: 149
Topic starter
(@bob81354)
Estimable Member
Joined: 15 years ago

it's a Malibu ML900TW 3 x(300) 900 watts
I can't find the amps


Reply
Posts: 366
(@technician)
Reputable Member
Joined: 12 years ago

Two important things to know. Light bulbs and dumb LED bulbs can be run on unfiltered DC. Intelligent lights require filtered and regulated power.

What is unknown about the low volt light system is, does it have filter caps, or just a transformer and diode?

In DC, Ohm;s law will give the 3rd value if 2 are known. Power = Volts times Amps. 900 Watts divided by 12 Volts = 75 Amps.

As previously mentioned, most are AC.


Reply
stallionent
Posts: 1460
(@stallionent)
Noble Member
Joined: 13 years ago

Malibu ML900TW is 12 volts AC
DC is required for LED's


Reply
Share: