I wonder how the semiconductor fuse held up this year?
In the output tab you can select which controllers to send data to. Sent from my SM-G960U using Tapatalk
Is the Edm transmitter available? Sent from my SM-G960U using Tapatalk
I have some I could send to you. Sent from my SM-G960U using Tapatalk
I reflow every solder joint on both boards. Ports 17-20 work fine. The rest of the ports have a flicker, on both boards. Sent from my SM-G960U using ...
Pic Sent from my SM-G960U using Tapatalk
Thanks Sent from my SM-G960U using Tapatalk
1) Do I need to set up the BBB first or can I do that with it installed on the Board? You can set it up installed on the board as long as FPP is inst...
The heat issue is on the diff expansion. Not the BBB16. Its the chips on the diff expansion.Sent from my SM-G960U using Tapatalk
I reflow the solder and it still makes heat. It possibly could be the Bbb16 expansion. With 3 diff expansion boards plugged in, the on-board 5v bu...
I built a diff expansion, when plugged in the black chip heats up. Is this normal? I'm running it with the BBB16 expansion v1. Sent from my SM-G960...
Thats looks like a great deal for someone in Ohio. Sent from my SM-G960U using Tapatalk
I was wondering if this is correct how I'm thinking the expansion boards will function. #1 is in dumb mode, #2 is V2 smart mode, #3 is V4 smart mode. ...
I've ordered the BBB 16 expansion it seems there's a conflict with 1 part per Jlcpcb support. Soldering issue of J6, the spacing between pins in gerb...
