Activity
 
Notifications
Clear all
steve123
@steve123
Estimable Member
Joined: Nov 18, 2019
Topics: 5 / Replies: 181
Reply
RE: ANOTHER pixel fire!

Caps are generally a different colour than the resistors. The body of the cap is typically a light brown or beige colour whereas a resistor typically...

2 years ago
Reply
RE: What brightness do you use?

I posted about pixels that use the GS8208 here: The GS8208 controller looks like a big improvement over the ws2811.

2 years ago
Reply
RE: ANOTHER pixel fire!

Santacarl wrote: Speaking of taking care where you buy......the 'fire pixels' were purchased from a 'known/trusted' source that everyone on the site ...

2 years ago
Reply
RE: BBB16 variant

Well, not much progress on the update to Scott's board. Board is complete just never had a chance to build one because some parts were not in stock a...

2 years ago
Forum
Reply
RE: ANOTHER pixel fire!

I realize 11 month have gone by but you might consider migrating to pixels that use the GS8208 controller over time. I stumbled across this controlle...

2 years ago
Reply
RE: What brightness do you use?

I will add that the discussion of brightness should also include a discussion of the dynamic range and the colour space. That is, when you reduce bri...

3 years ago
Reply
RE: BBB16 variant

I will likely have some time in the new year to get back to this. I think the lead time issues are likely more reasonable now. There will be some wo...

3 years ago
Forum
Reply
RE: PixelRadio, a DiY FM Transmitter with RDS RadioText

ThomasLED wrote:The hardware docs found on PixelRadio's GitHub repo were created with Altium Designer. Are the Altium files publicly available?

4 years ago
Forum
Reply
RE: BBB16 variant

Still waiting for the parts to be in stock. Sheez, it's taking forever.

4 years ago
Forum
Reply
RE: PixelRadio, a DiY FM Transmitter with RDS RadioText

ThomasLED wrote:PixelRadio version 1.1.0 was released today. It provides Dan's (dkulp) PTY function. And now all controllers can disable the RF carrie...

4 years ago
Forum
Reply
RE: PixelRadio, a DiY FM Transmitter with RDS RadioText

I went looking for the hardware design files but could not find them. Are these available publicly? What EDA tool did you use? KiCad?

4 years ago
Forum
Reply
RE: PixelRadio, a DiY FM Transmitter with RDS RadioText

ThomasLED wrote:I originally intended to make this a SMT board (I prefer SMD soldering over through-hole construction). But I didn't want to discourag...

4 years ago
Forum
Reply
RE: FPP PB16 Pixel Controller

Shawnd wrote:Controllers connected directly into the first strand of 112 pixels to 10'of wire to my door outline of 105 pixels, but only the first 8-1...

4 years ago
Forum
Reply
RE: Time to switch to Multicast

Macboy wrote: the neighbour not being able to open his garage door with the remote etc. It seems like the lights are part of the culprit. Could this b...

4 years ago
Topic
5 years ago
Forum
Replies: 10
Views: 9203
Page 3 / 13
Share: