This is a super old thread, and most probably don't care much, but Ikabod, JasonH, and I got this all worked out and Ikabod got his parts soon after t...
Awesome, I can make that work in lots of different ways! My other question was about using different LED's, ones that are sourced in the USA (to get...
Thanks Mactayl! Is there a spot in the wiki that has all the BOM's for the simple renards and the links to the schematics as well? My guess is that e...
Thanks Mactayl, Just to double check: if you supply the board with a constant 5v DC to the 5v pin, and the STR pin. The strobes start flashing, corre...
Thank you so much!!!
So I think the basic parallel port SSR will control these! Someone correct me if I'm wrong, but the old-school 8 channel SSR Direct attach was a sourc...
tstraub wrote:The Grinch is not a suitable controller to drive the strobe burst modules. The strobe burst module requires a positive voltage on the S...
I came up with another question too: Will these work with a converted grinch controller runnning DMX? Thanks so much for the help!
Sorry to just jump in here like this... Has anyone moved the 11 LED's off the board? I was thinking about spreading out the different LED's so that th...
Thanks so very much Mac! I put an order in yesterday, so once I get parts and boards made I will try to share with the group how well it works. I thi...
here is the realm where I don't usually venture... the nitty gritty electronics design. I understand what everything does, but not how it is changed.....
I would make brand new SSR's designed to carry the load, so yes, I would directly solder 12GA wire straight to the 20 amp triacs. I would make a 4 cha...
