I go to the website and see A$21 to order these. Is that one of each board? Or boards and BOM? Or boards, BOM and petri dish?
Maybe I haven't been following close enough. Sorry.
Brian
Skunberg wrote:I go to the website and see A$21 to order these. Is that one of each board? Or boards and BOM? Or boards, BOM and petri dish?
Maybe I haven't been following close enough. Sorry.
Brian
I believe $21 is for 4 SBM PCB's and 1 Splitter PCB,, not sure about the petri dishes I need to check with Dean on that. The BOM for the SBM is in post #108 of this thread.
It is a Mouser BOM and as we all know Mouser's prices are kinda high. You can find all the parts listed in the BOM at other places for a fraction of the cost.
These little clear cases can be purchased from Widget Supply:
http://www.widgetsupply.com/category/bead-storage.html
They are bead storage containers SKU number XUP3-8744 $2.49 for 4
Sorry to just jump in here like this... Has anyone moved the 11 LED's off the board? I was thinking about spreading out the different LED's so that the modules each looked bigger (like in a 2' circle.)
Second question, would these other LED's work? They are wide-angle ones, I thought that would help with visibility (plus they ship faster):
http://www.ebay.com/itm/lot-of-NEW-500-pcs-5-mm-Straw-Hat-Wide-Angle-White-LED-Bulb-USA-Seller-/180734801705?pt=US_Car_Lighting&hash=item2a14a23729
And last question (for this post 🙂 )
What would happen if we tied 2 LED's to each output to get 2x the light? would we just have to change the resistor values? Can the board handle the current?
Thanks so much for the help!!! I'm getting excited about having strobes this year!
I came up with another question too:
Will these work with a converted grinch controller runnning DMX?
Thanks so much for the help!



